With this information we can complete our calculation to determine the necessary recirculation flow rate required to overcome the heat loss in this particular system.  Since 1 gpm will convey 5000 BTUH at a 10°F ∆T, the recirculation flow rate is:

Dormont offers the complete gas connection system for the commercial kitchen. The 1675KITBS36 Dormont Blue Hose Moveable Gas Connector Kit makes connecting and disconnecting moveable/castered equipment easier and safer their standard quick-disconnect...

Size the Recirculation Return Line.  A sizing calculator (i.e. System Syzer) can be used to size the return line.  For 1.87 gpm we would choose a ¾” copper pipe. The friction loss for this diameter supply pipe will be about 1.4 ft per 100 ft., according to the System Syzer.

First, it is important to remember the objective of your design, which is to overcome the heat loss in the pipe between the water heater and the most distant fixture during periods of no draw.  Think of the recirculating portion of the system as an extension of the hot water storage.  The greater the storage volume, the more BTUs that are required to keep the water hot.  How many BTUs depends on the following factors:

Trust Dormont for the complete gas connect system designed for the commercial kitchen. We do. The 1675KITB48 Dormont Blue Hose Moveable Gas Connector Kit makes connecting and disconnecting moveable/castered equipment easier and safer with a ...

Trust Dormont for the complete gas connect system designed for the commercial kitchen. The 1675KITB2S48 Dormont Blue Hose Moveable Gas Connector Kit makes connecting and disconnecting moveable/castered equipment incredibly easy with the Standard Snap...

The Dormont 1675NPFS48 stationary gas connector is made from flexible stainless steel connectors with antimicrobial PVC coating designed to safely and cost-effectively install all types of stationary commercial gas cooking equipment. Large Diameter Gas...

Determine Pump Head & Select Pump.  Given that our recirculation line is 300 feet in lenth, and our flow rate is 1.9 gpm (rounded up), we must calculate the total friction loss:

2. The return portion of the recirculation piping need not be considered, as that heat loss occurs after the last fixture, and will not impact the supply water temperature.

Designing a domestic hot water recirculation system is not typically difficult.  In fact, we see the exact same model recirculation pump used in application after application without incident, as this one pump is typically able to meet the minor head and flow requirements of most recirculation systems.  That said it is important to work through the proper design procedures for any recirculation system.  A little time up front can save a lot time (and money) after the fact.

The Dormont 1675NPFS60 stationary gas connector is made from flexible stainless steel connectors with antimicrobial PVC coating designed to safely and cost-effectively install all types of stationary commercial gas cooking equipment. Large Diameter Gas...

The Dormont 1675BPQR60 makes connecting and disconnecting moveable/castered equipment easier and safer with the SnapFast quick-disconnect coupling. SnapFast is the only quick-disconnect coupling designed specifically for the needs of the foodservice...

Dormont is the world's leading provider of flexible stainless steel connectors for Natural/LP gas and fluid conveyance applications. They service customers in the Commercial Foodservice, Residential, and Appliance Original Equipment Manufacturers (OEM) markets.  With over 75 million gas connectors sold worldwide, their products safely connect a wide variety of appliances to a gas supply. With 60 years of knowledge and experience, Dormont has a proven track record and unmatched quality that customers and industry professionals rely on.

Trust Dormont for the complete gas connect system designed for the commercial kitchen. We do. The 1675KITB36 Dormont Blue Hose Moveable Gas Connector Kit makes connecting and disconnecting moveable/castered equipment easier and safer with a ...

Determine Recirculation Rate.  The recirculation rate is based on the heat loss that would occur between the heater and farthest fixture at no draw.  To determine this value we consult a piping heat loss chart (Table 1).  Remember, the values listed here are per 100 ft. so we apply our actual values, we will divide by 100.

The return portion of the recirculation piping need not be considered, as that heat loss occurs after the last fixture, and will not impact the supply water temperature.

Trust Dormont for the complete gas connect system designed for the commercial kitchen. The 1675KITB2S36 Dormont Blue Hose Moveable Gas Connector Kit makes connecting and disconnecting moveable/castered equipment incredibly easy with the Standard Snap...

Admittedly, it’s quite a few calculations to get to the definitive pump size and sizing programs are available to do most of the work.  Still, it’s important to understand the logic that goes into a properly designed hot water recirculation system, especially as system designs become more complex, as we shall see in some up coming blogs.

Save $10 today on your order of $100 or more when you sign up to receive emails. Offer valid on full-price items; US only. Must be a new email subscriber. Enter your email address to receive a promo code.

The Dormont 1650NPFS36 stationary gas connector is made from flexible stainless steel connectors with antimicrobial PVC coating designed to safely and cost-effectively install all types of stationary commercial gas cooking equipment. Large Diameter Gas...

With this information show here we can determine our required recirculation flow rate, size our recirculation pipe, and select the right size pump.

JMP is excited to announce our new technical HVAC magazine! It is a great resource to get bite-sized educational pieces similar to the content featured in our seminars. Register to have the latest blog sent to your email address.

1. The maximum temperature difference (Delta T) that you are willing to tolerate between the heater and the last fixture.  This is typically 10°F, 15°F or 20°F.

The Dormont 1675NPFS36 stationary gas connector is made from flexible stainless steel connectors with antimicrobial PVC coating designed to safely and cost-effectively install all types of stationary commercial gas cooking equipment. Large Diameter Gas...

For this design, a 10°F temperature drop has been chosen.  Table 2 shows us what the BTU/GPM relationship is for the various temperature drops.

Dormont offers the complete gas connection system for the commercial kitchen. The 1675KITBS48 Dormont Blue Hose Moveable Gas Connector Kit makes connecting and disconnecting moveable/castered equipment easier and safer their standard quick-disconnect...

Next, based on using insulated copper tube, with 25 ft. length between risers, we can manually calculate the total supply line heat loss from the heater to the farthest riser, coming up with a total heat loss of 9320 BTUHs.