The PRG200 series features precision pressure regulation to within 0.1% of full scale. Control with a pilot valves eliminates many problems found with conventional models.

The 975XL Reduced Pressure Principle Backflow Assembly is used on non-potable water applications for high health hazard protection from both backsiphonage and backpressure of contaminated water into the potable water supply. The wye pattern design with short lay length eases installation in compact spaces, and the cast bronze body includes separate access to the relief valve and each check valve for reduced labor costs and repair time. The 975XL is favored by installers around the world, and is the simplest, best performing, and most reliable backflow preventer in the irrigation market today. Assembly shall provide protection where a potential health hazard exists. For non-potable applications only.

The 975XL Reduced Pressure Principle Backflow Assembly is used on non-potable water applications for high health hazard protection from both backsiphonage and backpressure of contaminated water into the potable water supply. The wye pattern design with short lay length eases installation in compact spaces, and the cast bronze body includes separate access to the relief valve and each check valve for reduced labor costs and repair time. The 975XL is favored by installers around the world, and is the simplest, best performing, and most reliable backflow preventer in the irrigation market today. Assembly shall provide protection where a potential health hazard exists. For non-potable applications only.

This series is no longer available. Please contact our Flow Engineering department for assistance determining a suitable replacement.

The IP710 series provides precise, stable pressure control for pneumatic applications including valve actuators, air cylinders, pumps, etc. with a high 0.1% accuracy.

This series features a corrosion resistant exterior and small, lightweight construction for applications with limited space and either low flow or dead-end service.

The IP510 series of heavy duty pressure converters comes with FM and CSA approvals for use in hazardous locations with a high accuracy of 0.1%.

The PRG101 series offers a precision measurement capsule and a high gain servo amplifier to achieve high performance in dead-end applications.

The PRG350 series features a 316 SS housing and filter assemblies along with fluorocarbon elastomers to withstand harsh environments and corrosive gas.

The IP210A series is a general purpose pressure converter with a IP65/NEMA 4 enclosure for pneumatic control up to 120 psi with a DIN connection and adjustable zero and span.

The PRG300 series is designed to withstand harsh environments and provide accurate pneumatic pressure to instruments, valves, and other automatic control equipment.

The PRG98 series of high accuracy, miniature regulators is compact and lightweight for applications with limited space that require substantial flow capacity.

The IP610 series are compact pressure converters with a NEMA4-X / IP65 enclosure rating, which makes these perfect for applications where several converters are required.

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

This series has a poppet valve balanced by a rolling diaphragm to ensure a constant output pressure for applications requiring high flow capacity and accurate process control

The IP211/EP211 Series pressure converters supports a wide range of pressure supplies from 3 psi to 120 psi with FM and CSA intrinsically safe options.