Instant Hot WaterDispenser

This is not recommended. The main reason is the electric cooking appliances need to be off when using the instant hot water and this is not practical. Consider the 8L 48V tank hot water in the kitchen area.

This series prevents the reverse flow of contaminated water caused by backsiphonage or backpressure from entering the potable water supply. Ideal for protection at health hazard cross-connections in water services to industrial plants, hospitals, morgues, mortuaries, and chemical plants. Applications also extend to irrigation systems, boiler feeds, water lines, and other installations requiring the highest level of mechanical protection. End connection specified NPT ANSI/ASME B1.20.1.

Instant hot waterfor tea

In our tests that you can see on videos, we comfortably reached 40-45C from an 18C starting temperature. This is around 5000W. The flow rate is 3L/min

Instant hot waterheater under sink

Instant hot watersink

Series 825YA Reduced Pressure Zone assemblies feature a flood sensor with SentryPlus Alert® technology to detect excessive water discharges from the relief valve. Activated through an add-on connection kit, the sensor can trigger the alert system sending notification of flood detection to facility personnel. Connection kits are available for BMS and cellular communication.

For product-specific approval information, please refer to the product’s specification sheet (see literature section above) or ask a Watts representative. For general information regarding any approval certification partners identified in the specification sheet, please visit our certification partners’ websites:

Instant hot waterheater

Customers have reported higher temperatures at lower flow rates of 2 L/min.We have a customer posted video who get 40C+ on a 3000W inverter with a very low flow rate of 1.5L/min. The system needs at least 1.2L/min to operate.

Series 825YA Reduced Pressure Zone assemblies feature a flood sensor with SentryPlus Alert® technology to detect excessive water discharges from the relief valve. Activated through an add-on connection kit, the sensor can trigger the alert system sending notification of flood detection to facility personnel. Connection kits are available for BMS and cellular communication.This series prevents the reverse flow of contaminated water caused by backsiphonage or backpressure from entering the potable water supply. Ideal for protection at health hazard cross-connections in water services to industrial plants, hospitals, morgues, mortuaries, and chemical plants. Applications also extend to irrigation systems, boiler feeds, water lines, and other installations requiring the highest level of mechanical protection. End connection specified NPT ANSI/ASME B1.20.1.To learn more visit: https://www.watts.com/floodprotectionsystem

Yes, there are 12V and 48V tank based hot water systems in the 8L to 12L range.The benefit of the Safiery 48V tank based hot water is:the 1,000W of heating gives faster replenishment and makes a smaller tank more feasible to use.Operating in a kitchen does not impact electric cooking on an inverter based power system.The temperature setpoint goes to 70C. if plumbed exclusively in the kitchen a tempering valve may not be required.It can be operated from solar/scotty while driving very efficiently.