Manufacturing codes for Y strainers include ASME Section VIII, Division 1, ASME B31.3, B31.4, B31.8, B31.12, or in accordance with customer specifications.

Watts RPZ

Standard material for the Y strainer body and flanges is carbon steel with 304 stainless steel basket (carbon steel, 316 stainless steel, and other alloys are optional).  Some available materials are 300 series stainless steels (all or wetted parts only), Monel®400, Nickel 200, Hastelloy®B and C276, Inconel®, Incoloy®, and chrome moly.  Except for chrome moly, the basket can be manufactured in any of these materials.

T&C NT Series Acid Waste Dilution and Neutralization Tanks are made from Heavy Duty High-Density Polyethylene (HDPE) and come standard with inlet and outlet ...

50mmBackflow Preventer

202449 — To allow more gas to flow through a regulator and increase the pressure, turn the adjustment screw in a clockwise direction, tightening it. This ...

Thermostatic Mixing Valve (TMV). Overview Support. Add to cart.

Backflow preventerfor bidet

Wilkins backflow preventers has built reputation of designing products that answer the need of the customer and the voice of the customer was the driving ...

Air Gap Drain Fitting The air gap drain fitting is designed to attach to the relief port and pipe to a drain to direct any discharge to a safe place. Bottom features a 1/2" Female NPT Connection.

3/4" Watts LF909-QT-HW Reduced Pressure Zone Assembly. Currently the only device approved for hot water operation. Lead free, bronze body feature three covers. Known as the "Cadillac" of backflow preventers, the 909 is constructed of high quality parts for reliabilty and ease of service. Features full port, quarter turn ball valves on inlet and outlet. The hot water device has stainless steel check seats instead of the standard plastic found in the regular 909. Fully testable.Air gap drian fitting listed below is recommended. Designed to pipe a drain onto the relief valve port to avoid water damage due to relief valve discharge.

Watts DCV

backflowpreventer中文

Filter By · Mixing Valves · Commercial · Commercial · Commercial. Thermostatic Mixing Valve. List Price*: $253.10. R3270-MIXLF.

2022117 — A thermostatic mixing valve, or TMV, is a great little gadget that blends both hot and cold water together to achieve a particular, predetermined water ...

A complete selection of perforated metal and wire cloth is available for various openings and retention requirements. Typical basket openings are 80 mesh (0.0070”opening) for gas service, 40 mesh (0.0150” opening) for steam, and perforated with 1/8” diameter holes on 3/16” centers for process liquids. Most wire mesh sizes will have perforated support.

Backflowdevice

4 May 2023 — pipework. Only vented ... Reduction in the vertical above the DN 65 bend to a DN 50 or DN 40 vent, waste pipe or fixture trap is then.

Master Plumber, White, Plastic, Lavatory/Kitchen Floor Drain S Trap, 1-1/4" Or 1-1/2" O.D. Tube Slip Joint x 1-1/2" O.D. Tube, Includes Nuts & Washers, ...

Type 57 Y, or WYE strainers are usually smaller and lighter in weight than other types of fabricated inline strainers.  Y strainers are installed to protect pumps, compressors, valves, and downstream equipment by removing sand, dirt, pipe scale, grit, welding beads and other solids from liquids and gasses. When required, these strainers can be manufactured with longer face-to-face dimensions to match customer piping.

$196.49 /ea. Web Price. Chicago Faucets · Water Mixing Valves & Units; Material: Brass; ...

The basket access cover is available as a bolted blind flange with lifting handle or davit, or a quick-opening closure for easier and faster access for basket cleaning.

Stainless SteelBackflow Preventer

WattsBackflow preventer

Mixes cold water supply and heated water supply to deliver a set water temperature to safety shower or eye wash. Download the datasheet for more ...

3/4" Watts LF909-QT-HW Reduced Pressure Zone Assembly. Currently the only device approved for hot water operation. Lead free, bronze body feature three covers. Known as the "Cadillac" of backflow preventers, the 909 is constructed of high quality parts for reliabilty and ease of service. Features full port, quarter turn ball valves on inlet and outlet. The hot water device has stainless steel check seats instead of the standard plastic found in the regular 909. Fully testable.Air gap drian fitting listed below is recommended. Designed to pipe a drain onto the relief valve port to avoid water damage due to relief valve discharge.

Y Strainer options include lifting eye(s), differential pressure connections, vent, blowdown coupling, and other customer requirements. Inlet/outlet styles include flanged or butt weld.

Applications include process gas, chemicals, hydrocarbons, process liquids, process water, steam, and others for the refining, chemical, petrochemical, pulp and paper, and other industries.