Zurn Elkay 2-950XL3 2" Double Check Valve Backflow ... - backflow preventer double check valve

 2024-08-27 09:37:34

Kommentar * Navn Epost Nettsted Lagre navnet mitt, e -postadressen og webnettsted i denne nettleseren for neste gang jeg kommenterer.

Fly Net Zero is the commitment of airlines to achieve net zero carbon by 2050, bringing air transport in line with the Paris agreement to limit global warming to 1.5°C.

We use cookies to give you the best experience on our website. We also use cookies for advertising purposes. Please see our privacy policy and cookies policy for complete information.

Join us in Bangkok on 30-31 October, where airline retailing, finance and passenger experience unite to create a dynamic platform for strategic exploration, actionable insights, and transformative innovation.

This course uses our expertise to provide knowledge on cargo rating principles and Air Waybill completion, as well as basic marketing procedures.

Build on your knowledge of SMS, examining hazard and risk management, SMS operation, safety assurance and strategic integration.

ADVARSELMANGLENDE OVERHOLDELSE AV RIKTIG INSTALLASJONS- OG VEDLIKEHOLDSINSTRUKSJONER KAN BIDRA TIL VENTILFEILEN, SOM FØRER TIL SKADE OG/ELLER DØD.FOR Å SIKRE NØYAKTIG OG PÅLITELIG DRIFT AV DETTE PRODUKTET, ER DET VIKTIG Å:Utform systemet riktig for å minimere trykk- og temperaturvariasjoner.This valve is factory preset. However, it can be adjusted to deliver scalding temperatures. Check outlet tem-perature to ensure it does not exceed 105°F (41°C). Make sure temperature limit stop is properly re-set to maximum 105°F (41°C) following valve maintenance or repair. Tampering med grensestopp på noen måte kan føre til skoldingstemperatur som forårsaker alvorlig kroppsskade og/eller død.ADVARSELNeed for Periodic Inspection and Yearly Maintenance: Periodic inspection and yearly maintenance by a licensed con-tractor is required. Corrosive water conditions, inlet temperatures over 200°F (93°C), and/or unauthorized adjustments or repair could render the valve ineffective for service intended. Regular checking and cleaning of the valve’s internal components and check stops helps assure maximum life and proper product function. Frequency of cleaning and inspection depends upon local water conditions.This product meets the reduced Q test statistic criteria of 0.5 ppb for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.BeskrivelsePowers Series LFG480 & LFE480 are designed for lavatory applications where the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actua-tor quickly senses and compensate for outlet temperature fluc-tuations induced by water temperature and pressure changes in the supply line.SpesifikasjonerMaximum Operating Pressure: ……………………….. 125psi (861 kpa)Maximum Hot Water Temperature: ………………………. 180°F (82°C)Minimum Hot Water Supply Temp.: ….. 5°F (3°C) Above Set Point**Hot Water Inlet Temperature Range: ………. 120 – 180°F (49-82°C)Cold Water Inlet Temperature Range: …………… 40 – 80°F (4-27°C)Temperature Adjustment Range: ……………… 80 – 120°F (27-49°C)Minimum flyt:LFG480 …………………………………………… 0.25 gpm (1.0 lpm)LFE480 …………………………………………… 0.50 gpm (1.9 lpm)Listing: ……………… ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372** With Equal PressureFlytekapasitetÅ installereInstallation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the installer.Locate suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.Connect hot and cold supplies to valve and outlet of tem-pering valve to fixture (s) using 1/2″ or 3/8″ compression connections.Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.Turn on fixture and allow water to flow for 2 minutes. Measure water temperature at the outlet. If water is not at desired temperature, adjust as necessary (see temperature adjustment section). Maximum outlet temperature of 105°F (41°C) is recommended.TemperaturjusteringLøsne låsemutteren.Turn on fixture and run water for at least two minutes to allow supply temperature to stabilize.Vri temperaturspindelen mot klokken for varmere eller med klokken for kaldere utløpstemperatur.Stram til låsemutteren for å forhindre utilsiktet eller uautorisert temperaturjustering.Sjekk utløpstemperaturen på nytt.ReparasjonssettMotor Repair Kit: ………………………………………………………. 480 270ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

powerslfe480-10

Find all press material from IATA's Annual General Meeting and World Air Transport Summit that took place in Dubai, 2-4 June

Acquire the new skills needed to meet the challenges of the road to recovery, from safety management to emergency planning and risk management.

Å installereSkyll alle rør grundig før installasjon.Locate a suitable place for the tempering valve. It should be accessible for service and adjustment and as close to the point-of-use as possible.Connect the hot and cold supplies to the valve and the outlet of the tempering valve to the fixture(s) using 1/2 or 3/8 compression connections.Turn on the hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.TemperaturjusteringLøsne låsemutteren.Turn on the fixture and run water for at least two minutes to allow the supply temperature to stabilize.Turn the temperature stem counter-clockwise for hotter or clockwise for colder outlet temperature.Tighten the locknut to prevent accidental or unauthorized temperature adjustment.Re-check the outlet temperature.ReparasjonssettMotor Repair Kit: 480 270FAQQ: What are the flow capacities of the LFG480 and LFE480?A: The flow capacity of the LFG480 is 0.25 gpm (1.0 lpm) and the flow capacity of the LFE480 is 0.50 gpm (1.9 lpm).Spørsmål: Hvilke sertifiseringer har dette produktet?A: This product is certified to ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372.Q: Is the temperature adjustment easy?A: Yes, the temperature adjustment can be easily done by following the provided instructions.Spørsmål: Er det noen kjemikalier i dette produktet som kan forårsake skade?A: Yes, this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.watts.com/prop65.ADVARSELLes denne håndboken FØR du bruker dette utstyret.Unnlatelse av å lese og følge all informasjon om sikkerhet og bruk kan føre til død, alvorlig personskade, materiell skade eller skade på utstyret.Ta vare på denne håndboken for fremtidig referanse.ADVARSELDu er pålagt å konsultere de lokale bygge- og rørleggerforskriftene før installasjon. Hvis informasjonen i denne håndboken ikke stemmer overens med lokale bygge- eller rørleggerforskrifter, bør de lokale forskriftene følges. Spør myndighetene for ytterligere lokale krav.ADVARSELMANGLENDE OVERHOLDELSE AV RIKTIG INSTALLASJONS- OG VEDLIKEHOLDSINSTRUKSJONER KAN BIDRA TIL VENTILFEILEN, SOM FØRER TIL SKADE OG/ELLER DØD.FOR Å SIKRE NØYAKTIG OG PÅLITELIG DRIFT AV DETTE PRODUKTET, ER DET VIKTIG Å:Utform systemet riktig for å minimere trykk- og temperaturvariasjoner.This valve is factory preset. However, it can be adjusted to deliver scalding temperatures. Check outlet tem-perature to ensure it does not exceed 105°F (41°C). Make sure temperature limit stop is properly re-set to maximum 105°F (41°C) following valve maintenance or repair. Tampering med grensestopp på noen måte kan føre til skoldingstemperatur som forårsaker alvorlig kroppsskade og/eller død.ADVARSELNeed for Periodic Inspection and Yearly Maintenance: Periodic inspection and yearly maintenance by a licensed con-tractor is required. Corrosive water conditions, inlet temperatures over 200°F (93°C), and/or unauthorized adjustments or repair could render the valve ineffective for service intended. Regular checking and cleaning of the valve’s internal components and check stops helps assure maximum life and proper product function. Frequency of cleaning and inspection depends upon local water conditions.This product meets the reduced Q test statistic criteria of 0.5 ppb for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.BeskrivelsePowers Series LFG480 & LFE480 are designed for lavatory applications where the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actua-tor quickly senses and compensate for outlet temperature fluc-tuations induced by water temperature and pressure changes in the supply line.SpesifikasjonerMaximum Operating Pressure: ……………………….. 125psi (861 kpa)Maximum Hot Water Temperature: ………………………. 180°F (82°C)Minimum Hot Water Supply Temp.: ….. 5°F (3°C) Above Set Point**Hot Water Inlet Temperature Range: ………. 120 – 180°F (49-82°C)Cold Water Inlet Temperature Range: …………… 40 – 80°F (4-27°C)Temperature Adjustment Range: ……………… 80 – 120°F (27-49°C)Minimum flyt:LFG480 …………………………………………… 0.25 gpm (1.0 lpm)LFE480 …………………………………………… 0.50 gpm (1.9 lpm)Listing: ……………… ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372** With Equal PressureFlytekapasitetÅ installereInstallation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the installer.Locate suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.Connect hot and cold supplies to valve and outlet of tem-pering valve to fixture (s) using 1/2″ or 3/8″ compression connections.Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.Turn on fixture and allow water to flow for 2 minutes. Measure water temperature at the outlet. If water is not at desired temperature, adjust as necessary (see temperature adjustment section). Maximum outlet temperature of 105°F (41°C) is recommended.TemperaturjusteringLøsne låsemutteren.Turn on fixture and run water for at least two minutes to allow supply temperature to stabilize.Vri temperaturspindelen mot klokken for varmere eller med klokken for kaldere utløpstemperatur.Stram til låsemutteren for å forhindre utilsiktet eller uautorisert temperaturjustering.Sjekk utløpstemperaturen på nytt.ReparasjonssettMotor Repair Kit: ………………………………………………………. 480 270ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot ...

Motor Repair Kit: 480 270FAQQ: What are the flow capacities of the LFG480 and LFE480?A: The flow capacity of the LFG480 is 0.25 gpm (1.0 lpm) and the flow capacity of the LFE480 is 0.50 gpm (1.9 lpm).Spørsmål: Hvilke sertifiseringer har dette produktet?A: This product is certified to ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372.Q: Is the temperature adjustment easy?A: Yes, the temperature adjustment can be easily done by following the provided instructions.Spørsmål: Er det noen kjemikalier i dette produktet som kan forårsake skade?A: Yes, this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.watts.com/prop65.ADVARSELLes denne håndboken FØR du bruker dette utstyret.Unnlatelse av å lese og følge all informasjon om sikkerhet og bruk kan føre til død, alvorlig personskade, materiell skade eller skade på utstyret.Ta vare på denne håndboken for fremtidig referanse.ADVARSELDu er pålagt å konsultere de lokale bygge- og rørleggerforskriftene før installasjon. Hvis informasjonen i denne håndboken ikke stemmer overens med lokale bygge- eller rørleggerforskrifter, bør de lokale forskriftene følges. Spør myndighetene for ytterligere lokale krav.ADVARSELMANGLENDE OVERHOLDELSE AV RIKTIG INSTALLASJONS- OG VEDLIKEHOLDSINSTRUKSJONER KAN BIDRA TIL VENTILFEILEN, SOM FØRER TIL SKADE OG/ELLER DØD.FOR Å SIKRE NØYAKTIG OG PÅLITELIG DRIFT AV DETTE PRODUKTET, ER DET VIKTIG Å:Utform systemet riktig for å minimere trykk- og temperaturvariasjoner.This valve is factory preset. However, it can be adjusted to deliver scalding temperatures. Check outlet tem-perature to ensure it does not exceed 105°F (41°C). Make sure temperature limit stop is properly re-set to maximum 105°F (41°C) following valve maintenance or repair. Tampering med grensestopp på noen måte kan føre til skoldingstemperatur som forårsaker alvorlig kroppsskade og/eller død.ADVARSELNeed for Periodic Inspection and Yearly Maintenance: Periodic inspection and yearly maintenance by a licensed con-tractor is required. Corrosive water conditions, inlet temperatures over 200°F (93°C), and/or unauthorized adjustments or repair could render the valve ineffective for service intended. Regular checking and cleaning of the valve’s internal components and check stops helps assure maximum life and proper product function. Frequency of cleaning and inspection depends upon local water conditions.This product meets the reduced Q test statistic criteria of 0.5 ppb for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.BeskrivelsePowers Series LFG480 & LFE480 are designed for lavatory applications where the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actua-tor quickly senses and compensate for outlet temperature fluc-tuations induced by water temperature and pressure changes in the supply line.SpesifikasjonerMaximum Operating Pressure: ……………………….. 125psi (861 kpa)Maximum Hot Water Temperature: ………………………. 180°F (82°C)Minimum Hot Water Supply Temp.: ….. 5°F (3°C) Above Set Point**Hot Water Inlet Temperature Range: ………. 120 – 180°F (49-82°C)Cold Water Inlet Temperature Range: …………… 40 – 80°F (4-27°C)Temperature Adjustment Range: ……………… 80 – 120°F (27-49°C)Minimum flyt:LFG480 …………………………………………… 0.25 gpm (1.0 lpm)LFE480 …………………………………………… 0.50 gpm (1.9 lpm)Listing: ……………… ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372** With Equal PressureFlytekapasitetÅ installereInstallation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the installer.Locate suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.Connect hot and cold supplies to valve and outlet of tem-pering valve to fixture (s) using 1/2″ or 3/8″ compression connections.Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.Turn on fixture and allow water to flow for 2 minutes. Measure water temperature at the outlet. If water is not at desired temperature, adjust as necessary (see temperature adjustment section). Maximum outlet temperature of 105°F (41°C) is recommended.TemperaturjusteringLøsne låsemutteren.Turn on fixture and run water for at least two minutes to allow supply temperature to stabilize.Vri temperaturspindelen mot klokken for varmere eller med klokken for kaldere utløpstemperatur.Stram til låsemutteren for å forhindre utilsiktet eller uautorisert temperaturjustering.Sjekk utløpstemperaturen på nytt.ReparasjonssettMotor Repair Kit: ………………………………………………………. 480 270ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.com

Learn how to apply the techniques of collaborative decision making (CDM) in the context of airports (A-CDM) and ground operations

PowersMixing Valve

Series 009QT furnished with quarter turn, full port, resilient seated, bronze ball valve shutoffs. Pressure / Temperature Series 009 1⁄4" – 2" Suitable for ...

Stay up-to-date with the latest in Aeronautical Information Management (AIM), reviewing SWIM, eTOD, AICM/ AIXM, aerodrome mapping, aeronautical information briefing, e-AIP, AIS/MET datalink.

BeskrivelsePowers Series LFG480 & LFE480 are designed for lavatory applications where the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actua-tor quickly senses and compensate for outlet temperature fluc-tuations induced by water temperature and pressure changes in the supply line.SpesifikasjonerMaximum Operating Pressure: ……………………….. 125psi (861 kpa)Maximum Hot Water Temperature: ………………………. 180°F (82°C)Minimum Hot Water Supply Temp.: ….. 5°F (3°C) Above Set Point**Hot Water Inlet Temperature Range: ………. 120 – 180°F (49-82°C)Cold Water Inlet Temperature Range: …………… 40 – 80°F (4-27°C)Temperature Adjustment Range: ……………… 80 – 120°F (27-49°C)Minimum flyt:LFG480 …………………………………………… 0.25 gpm (1.0 lpm)LFE480 …………………………………………… 0.50 gpm (1.9 lpm)Listing: ……………… ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372** With Equal PressureFlytekapasitetÅ installereInstallation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the installer.Locate suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.Connect hot and cold supplies to valve and outlet of tem-pering valve to fixture (s) using 1/2″ or 3/8″ compression connections.Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.Turn on fixture and allow water to flow for 2 minutes. Measure water temperature at the outlet. If water is not at desired temperature, adjust as necessary (see temperature adjustment section). Maximum outlet temperature of 105°F (41°C) is recommended.TemperaturjusteringLøsne låsemutteren.Turn on fixture and run water for at least two minutes to allow supply temperature to stabilize.Vri temperaturspindelen mot klokken for varmere eller med klokken for kaldere utløpstemperatur.Stram til låsemutteren for å forhindre utilsiktet eller uautorisert temperaturjustering.Sjekk utløpstemperaturen på nytt.ReparasjonssettMotor Repair Kit: ………………………………………………………. 480 270ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

ADVARSELDu er pålagt å konsultere de lokale bygge- og rørleggerforskriftene før installasjon. Hvis informasjonen i denne håndboken ikke stemmer overens med lokale bygge- eller rørleggerforskrifter, bør de lokale forskriftene følges. Spør myndighetene for ytterligere lokale krav.ADVARSELMANGLENDE OVERHOLDELSE AV RIKTIG INSTALLASJONS- OG VEDLIKEHOLDSINSTRUKSJONER KAN BIDRA TIL VENTILFEILEN, SOM FØRER TIL SKADE OG/ELLER DØD.FOR Å SIKRE NØYAKTIG OG PÅLITELIG DRIFT AV DETTE PRODUKTET, ER DET VIKTIG Å:Utform systemet riktig for å minimere trykk- og temperaturvariasjoner.This valve is factory preset. However, it can be adjusted to deliver scalding temperatures. Check outlet tem-perature to ensure it does not exceed 105°F (41°C). Make sure temperature limit stop is properly re-set to maximum 105°F (41°C) following valve maintenance or repair. Tampering med grensestopp på noen måte kan føre til skoldingstemperatur som forårsaker alvorlig kroppsskade og/eller død.ADVARSELNeed for Periodic Inspection and Yearly Maintenance: Periodic inspection and yearly maintenance by a licensed con-tractor is required. Corrosive water conditions, inlet temperatures over 200°F (93°C), and/or unauthorized adjustments or repair could render the valve ineffective for service intended. Regular checking and cleaning of the valve’s internal components and check stops helps assure maximum life and proper product function. Frequency of cleaning and inspection depends upon local water conditions.This product meets the reduced Q test statistic criteria of 0.5 ppb for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.BeskrivelsePowers Series LFG480 & LFE480 are designed for lavatory applications where the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actua-tor quickly senses and compensate for outlet temperature fluc-tuations induced by water temperature and pressure changes in the supply line.SpesifikasjonerMaximum Operating Pressure: ……………………….. 125psi (861 kpa)Maximum Hot Water Temperature: ………………………. 180°F (82°C)Minimum Hot Water Supply Temp.: ….. 5°F (3°C) Above Set Point**Hot Water Inlet Temperature Range: ………. 120 – 180°F (49-82°C)Cold Water Inlet Temperature Range: …………… 40 – 80°F (4-27°C)Temperature Adjustment Range: ……………… 80 – 120°F (27-49°C)Minimum flyt:LFG480 …………………………………………… 0.25 gpm (1.0 lpm)LFE480 …………………………………………… 0.50 gpm (1.9 lpm)Listing: ……………… ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372** With Equal PressureFlytekapasitetÅ installereInstallation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the installer.Locate suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.Connect hot and cold supplies to valve and outlet of tem-pering valve to fixture (s) using 1/2″ or 3/8″ compression connections.Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.Turn on fixture and allow water to flow for 2 minutes. Measure water temperature at the outlet. If water is not at desired temperature, adjust as necessary (see temperature adjustment section). Maximum outlet temperature of 105°F (41°C) is recommended.TemperaturjusteringLøsne låsemutteren.Turn on fixture and run water for at least two minutes to allow supply temperature to stabilize.Vri temperaturspindelen mot klokken for varmere eller med klokken for kaldere utløpstemperatur.Stram til låsemutteren for å forhindre utilsiktet eller uautorisert temperaturjustering.Sjekk utløpstemperaturen på nytt.ReparasjonssettMotor Repair Kit: ………………………………………………………. 480 270ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

LFLM495

Find company research, competitor information, contact details & financial data for Radiant Inc of Agoura Hills, CA. Get the latest business insights from ...

1 Mar 2024 — A simple explanation of a backflow prevention device is that it fits onto a pipe and ensures that the water only flows in one direction. This ...

ADVARSELNeed for Periodic Inspection and Yearly Maintenance: Periodic inspection and yearly maintenance by a licensed con-tractor is required. Corrosive water conditions, inlet temperatures over 200°F (93°C), and/or unauthorized adjustments or repair could render the valve ineffective for service intended. Regular checking and cleaning of the valve’s internal components and check stops helps assure maximum life and proper product function. Frequency of cleaning and inspection depends upon local water conditions.This product meets the reduced Q test statistic criteria of 0.5 ppb for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.BeskrivelsePowers Series LFG480 & LFE480 are designed for lavatory applications where the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actua-tor quickly senses and compensate for outlet temperature fluc-tuations induced by water temperature and pressure changes in the supply line.SpesifikasjonerMaximum Operating Pressure: ……………………….. 125psi (861 kpa)Maximum Hot Water Temperature: ………………………. 180°F (82°C)Minimum Hot Water Supply Temp.: ….. 5°F (3°C) Above Set Point**Hot Water Inlet Temperature Range: ………. 120 – 180°F (49-82°C)Cold Water Inlet Temperature Range: …………… 40 – 80°F (4-27°C)Temperature Adjustment Range: ……………… 80 – 120°F (27-49°C)Minimum flyt:LFG480 …………………………………………… 0.25 gpm (1.0 lpm)LFE480 …………………………………………… 0.50 gpm (1.9 lpm)Listing: ……………… ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372** With Equal PressureFlytekapasitetÅ installereInstallation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the installer.Locate suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.Connect hot and cold supplies to valve and outlet of tem-pering valve to fixture (s) using 1/2″ or 3/8″ compression connections.Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.Turn on fixture and allow water to flow for 2 minutes. Measure water temperature at the outlet. If water is not at desired temperature, adjust as necessary (see temperature adjustment section). Maximum outlet temperature of 105°F (41°C) is recommended.TemperaturjusteringLøsne låsemutteren.Turn on fixture and run water for at least two minutes to allow supply temperature to stabilize.Vri temperaturspindelen mot klokken for varmere eller med klokken for kaldere utløpstemperatur.Stram til låsemutteren for å forhindre utilsiktet eller uautorisert temperaturjustering.Sjekk utløpstemperaturen på nytt.ReparasjonssettMotor Repair Kit: ………………………………………………………. 480 270ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

Beskrivelse: Designed for lavatory applicationswhere the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actuator quickly senses and compensates for outlet temperature fluctuations induced by water temperature and pressure changes in the supply line.

A: Yes, the temperature adjustment can be easily done by following the provided instructions.Spørsmål: Er det noen kjemikalier i dette produktet som kan forårsake skade?A: Yes, this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.watts.com/prop65.ADVARSELLes denne håndboken FØR du bruker dette utstyret.Unnlatelse av å lese og følge all informasjon om sikkerhet og bruk kan føre til død, alvorlig personskade, materiell skade eller skade på utstyret.Ta vare på denne håndboken for fremtidig referanse.ADVARSELDu er pålagt å konsultere de lokale bygge- og rørleggerforskriftene før installasjon. Hvis informasjonen i denne håndboken ikke stemmer overens med lokale bygge- eller rørleggerforskrifter, bør de lokale forskriftene følges. Spør myndighetene for ytterligere lokale krav.ADVARSELMANGLENDE OVERHOLDELSE AV RIKTIG INSTALLASJONS- OG VEDLIKEHOLDSINSTRUKSJONER KAN BIDRA TIL VENTILFEILEN, SOM FØRER TIL SKADE OG/ELLER DØD.FOR Å SIKRE NØYAKTIG OG PÅLITELIG DRIFT AV DETTE PRODUKTET, ER DET VIKTIG Å:Utform systemet riktig for å minimere trykk- og temperaturvariasjoner.This valve is factory preset. However, it can be adjusted to deliver scalding temperatures. Check outlet tem-perature to ensure it does not exceed 105°F (41°C). Make sure temperature limit stop is properly re-set to maximum 105°F (41°C) following valve maintenance or repair. Tampering med grensestopp på noen måte kan føre til skoldingstemperatur som forårsaker alvorlig kroppsskade og/eller død.ADVARSELNeed for Periodic Inspection and Yearly Maintenance: Periodic inspection and yearly maintenance by a licensed con-tractor is required. Corrosive water conditions, inlet temperatures over 200°F (93°C), and/or unauthorized adjustments or repair could render the valve ineffective for service intended. Regular checking and cleaning of the valve’s internal components and check stops helps assure maximum life and proper product function. Frequency of cleaning and inspection depends upon local water conditions.This product meets the reduced Q test statistic criteria of 0.5 ppb for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.BeskrivelsePowers Series LFG480 & LFE480 are designed for lavatory applications where the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actua-tor quickly senses and compensate for outlet temperature fluc-tuations induced by water temperature and pressure changes in the supply line.SpesifikasjonerMaximum Operating Pressure: ……………………….. 125psi (861 kpa)Maximum Hot Water Temperature: ………………………. 180°F (82°C)Minimum Hot Water Supply Temp.: ….. 5°F (3°C) Above Set Point**Hot Water Inlet Temperature Range: ………. 120 – 180°F (49-82°C)Cold Water Inlet Temperature Range: …………… 40 – 80°F (4-27°C)Temperature Adjustment Range: ……………… 80 – 120°F (27-49°C)Minimum flyt:LFG480 …………………………………………… 0.25 gpm (1.0 lpm)LFE480 …………………………………………… 0.50 gpm (1.9 lpm)Listing: ……………… ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372** With Equal PressureFlytekapasitetÅ installereInstallation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the installer.Locate suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.Connect hot and cold supplies to valve and outlet of tem-pering valve to fixture (s) using 1/2″ or 3/8″ compression connections.Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.Turn on fixture and allow water to flow for 2 minutes. Measure water temperature at the outlet. If water is not at desired temperature, adjust as necessary (see temperature adjustment section). Maximum outlet temperature of 105°F (41°C) is recommended.TemperaturjusteringLøsne låsemutteren.Turn on fixture and run water for at least two minutes to allow supply temperature to stabilize.Vri temperaturspindelen mot klokken for varmere eller med klokken for kaldere utløpstemperatur.Stram til låsemutteren for å forhindre utilsiktet eller uautorisert temperaturjustering.Sjekk utløpstemperaturen på nytt.ReparasjonssettMotor Repair Kit: ………………………………………………………. 480 270ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

lfg480-00q

Learn how to apply the techniques of collaborative decision making (CDM) in the context of airports (A-CDM) and ground operations

Easily fulfill your Montana Plumber Continuing Education requirements with CE Made Simple. Our courses are simple to use and are available 24/7 in the ...

PowersLM495

Need for Periodic Inspection and Yearly Maintenance: Periodic inspection and yearly maintenance by a licensed con-tractor is required. Corrosive water conditions, inlet temperatures over 200°F (93°C), and/or unauthorized adjustments or repair could render the valve ineffective for service intended. Regular checking and cleaning of the valve’s internal components and check stops helps assure maximum life and proper product function. Frequency of cleaning and inspection depends upon local water conditions.This product meets the reduced Q test statistic criteria of 0.5 ppb for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.BeskrivelsePowers Series LFG480 & LFE480 are designed for lavatory applications where the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actua-tor quickly senses and compensate for outlet temperature fluc-tuations induced by water temperature and pressure changes in the supply line.SpesifikasjonerMaximum Operating Pressure: ……………………….. 125psi (861 kpa)Maximum Hot Water Temperature: ………………………. 180°F (82°C)Minimum Hot Water Supply Temp.: ….. 5°F (3°C) Above Set Point**Hot Water Inlet Temperature Range: ………. 120 – 180°F (49-82°C)Cold Water Inlet Temperature Range: …………… 40 – 80°F (4-27°C)Temperature Adjustment Range: ……………… 80 – 120°F (27-49°C)Minimum flyt:LFG480 …………………………………………… 0.25 gpm (1.0 lpm)LFE480 …………………………………………… 0.50 gpm (1.9 lpm)Listing: ……………… ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372** With Equal PressureFlytekapasitetÅ installereInstallation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the installer.Locate suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.Connect hot and cold supplies to valve and outlet of tem-pering valve to fixture (s) using 1/2″ or 3/8″ compression connections.Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.Turn on fixture and allow water to flow for 2 minutes. Measure water temperature at the outlet. If water is not at desired temperature, adjust as necessary (see temperature adjustment section). Maximum outlet temperature of 105°F (41°C) is recommended.TemperaturjusteringLøsne låsemutteren.Turn on fixture and run water for at least two minutes to allow supply temperature to stabilize.Vri temperaturspindelen mot klokken for varmere eller med klokken for kaldere utløpstemperatur.Stram til låsemutteren for å forhindre utilsiktet eller uautorisert temperaturjustering.Sjekk utløpstemperaturen på nytt.ReparasjonssettMotor Repair Kit: ………………………………………………………. 480 270ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

Pressure Relief with SS spring PSI range: 0-150 Inlet/Outlet: 3/4" Bsp.

A: Yes, this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.watts.com/prop65.

A: This product is certified to ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372.Q: Is the temperature adjustment easy?A: Yes, the temperature adjustment can be easily done by following the provided instructions.Spørsmål: Er det noen kjemikalier i dette produktet som kan forårsake skade?A: Yes, this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.watts.com/prop65.ADVARSELLes denne håndboken FØR du bruker dette utstyret.Unnlatelse av å lese og følge all informasjon om sikkerhet og bruk kan føre til død, alvorlig personskade, materiell skade eller skade på utstyret.Ta vare på denne håndboken for fremtidig referanse.ADVARSELDu er pålagt å konsultere de lokale bygge- og rørleggerforskriftene før installasjon. Hvis informasjonen i denne håndboken ikke stemmer overens med lokale bygge- eller rørleggerforskrifter, bør de lokale forskriftene følges. Spør myndighetene for ytterligere lokale krav.ADVARSELMANGLENDE OVERHOLDELSE AV RIKTIG INSTALLASJONS- OG VEDLIKEHOLDSINSTRUKSJONER KAN BIDRA TIL VENTILFEILEN, SOM FØRER TIL SKADE OG/ELLER DØD.FOR Å SIKRE NØYAKTIG OG PÅLITELIG DRIFT AV DETTE PRODUKTET, ER DET VIKTIG Å:Utform systemet riktig for å minimere trykk- og temperaturvariasjoner.This valve is factory preset. However, it can be adjusted to deliver scalding temperatures. Check outlet tem-perature to ensure it does not exceed 105°F (41°C). Make sure temperature limit stop is properly re-set to maximum 105°F (41°C) following valve maintenance or repair. Tampering med grensestopp på noen måte kan føre til skoldingstemperatur som forårsaker alvorlig kroppsskade og/eller død.ADVARSELNeed for Periodic Inspection and Yearly Maintenance: Periodic inspection and yearly maintenance by a licensed con-tractor is required. Corrosive water conditions, inlet temperatures over 200°F (93°C), and/or unauthorized adjustments or repair could render the valve ineffective for service intended. Regular checking and cleaning of the valve’s internal components and check stops helps assure maximum life and proper product function. Frequency of cleaning and inspection depends upon local water conditions.This product meets the reduced Q test statistic criteria of 0.5 ppb for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.BeskrivelsePowers Series LFG480 & LFE480 are designed for lavatory applications where the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actua-tor quickly senses and compensate for outlet temperature fluc-tuations induced by water temperature and pressure changes in the supply line.SpesifikasjonerMaximum Operating Pressure: ……………………….. 125psi (861 kpa)Maximum Hot Water Temperature: ………………………. 180°F (82°C)Minimum Hot Water Supply Temp.: ….. 5°F (3°C) Above Set Point**Hot Water Inlet Temperature Range: ………. 120 – 180°F (49-82°C)Cold Water Inlet Temperature Range: …………… 40 – 80°F (4-27°C)Temperature Adjustment Range: ……………… 80 – 120°F (27-49°C)Minimum flyt:LFG480 …………………………………………… 0.25 gpm (1.0 lpm)LFE480 …………………………………………… 0.50 gpm (1.9 lpm)Listing: ……………… ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372** With Equal PressureFlytekapasitetÅ installereInstallation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the installer.Locate suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.Connect hot and cold supplies to valve and outlet of tem-pering valve to fixture (s) using 1/2″ or 3/8″ compression connections.Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.Turn on fixture and allow water to flow for 2 minutes. Measure water temperature at the outlet. If water is not at desired temperature, adjust as necessary (see temperature adjustment section). Maximum outlet temperature of 105°F (41°C) is recommended.TemperaturjusteringLøsne låsemutteren.Turn on fixture and run water for at least two minutes to allow supply temperature to stabilize.Vri temperaturspindelen mot klokken for varmere eller med klokken for kaldere utløpstemperatur.Stram til låsemutteren for å forhindre utilsiktet eller uautorisert temperaturjustering.Sjekk utløpstemperaturen på nytt.ReparasjonssettMotor Repair Kit: ………………………………………………………. 480 270ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

PowersLM490

Providing (non-finance) managers with a solid understanding of financial and accounting processes that you will encounter in your everyday work.

For commercial properties you're required to have your back flow valves ... With the installation of a backflow valve, it empowers the anti-water ...

ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

Featured Products · ORGANOPHOSPHONATE No1 TABS · Alkalinity (total) Titrets?« Titration Cells 50- · Tank/Well/Bore Water Test Kit · pH strips 0 - 14 - round.

Dette webnettstedet er en uavhengig publikasjon og er verken tilknyttet eller godkjent av noen av varemerkeeierne. "Bluetooth®"-ordmerket og -logoer er registrerte varemerker som eies av Bluetooth SIG, Inc. "Wi-Fi®"-ordmerket og -logoer er registrerte varemerker som eies av Wi-Fi Alliance. Enhver bruk av disse merkene på dette webnettstedet innebærer ingen tilknytning til eller godkjenning.

Providing an overview of the various sources and impacts of noise with a review of the ICAO Balanced Approach to Aircraft Noise Management

Navn Epost Nettsted Lagre navnet mitt, e -postadressen og webnettsted i denne nettleseren for neste gang jeg kommenterer.

As a trusted voice in the aviation community, we can help raise your profile and ensure you are seen by the audience that really matters to you. Our offers are customizable to your needs, whether on our websites, our events or in our manuals.

Powersprice list

Hot Water Recirculation Pumps - FOR TANKLESS · ACT D'MAND KONTROLS SS1-200 Series Hot Water Recirculation Pumps · AquaMotion AMH1K-6ODRZT1 Tankless Pump and ...

Learn to speak accounting language, grasp accounting principles and interpret financial statements to assess and steer your business.

Get the required training foreseen in EU regulation 1998/2015 and position yourself to become an accredited EU Aviation Security Validator by an EU member state.

Powers Series LFG480 & LFE480 are designed for lavatory applications where the temperature of the hot water must be controlled for safe, economic use. An advanced thermal actua-tor quickly senses and compensate for outlet temperature fluc-tuations induced by water temperature and pressure changes in the supply line.SpesifikasjonerMaximum Operating Pressure: ……………………….. 125psi (861 kpa)Maximum Hot Water Temperature: ………………………. 180°F (82°C)Minimum Hot Water Supply Temp.: ….. 5°F (3°C) Above Set Point**Hot Water Inlet Temperature Range: ………. 120 – 180°F (49-82°C)Cold Water Inlet Temperature Range: …………… 40 – 80°F (4-27°C)Temperature Adjustment Range: ……………… 80 – 120°F (27-49°C)Minimum flyt:LFG480 …………………………………………… 0.25 gpm (1.0 lpm)LFE480 …………………………………………… 0.50 gpm (1.9 lpm)Listing: ……………… ASSE 1070, IAPMO cUPC, and NSF 61-9 & 372** With Equal PressureFlytekapasitetÅ installereInstallation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the installer.Locate suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.Connect hot and cold supplies to valve and outlet of tem-pering valve to fixture (s) using 1/2″ or 3/8″ compression connections.Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.Turn on fixture and allow water to flow for 2 minutes. Measure water temperature at the outlet. If water is not at desired temperature, adjust as necessary (see temperature adjustment section). Maximum outlet temperature of 105°F (41°C) is recommended.TemperaturjusteringLøsne låsemutteren.Turn on fixture and run water for at least two minutes to allow supply temperature to stabilize.Vri temperaturspindelen mot klokken for varmere eller med klokken for kaldere utløpstemperatur.Stram til låsemutteren for å forhindre utilsiktet eller uautorisert temperaturjustering.Sjekk utløpstemperaturen på nytt.ReparasjonssettMotor Repair Kit: ………………………………………………………. 480 270ADVARSEL: Dette produktet inneholder kjemikalier kjent for staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskader.For mer informasjon: www.watts.com/prop65GarantiThe Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.USA: T: (888) 432-8932 • PowersControls.comCanada: T: (888) 208-8927 • PowersControls.caLatin-Amerika: T: (52) 55-4122-0138 • PowersControls.comDokumenter / RessurserPOWER LFG480 Series Lavatory Tempering Valve [pdf] BruksanvisningLFE480-00Q, LFE480-10Q, LFG480 Series Lavatory Tempering Valve, Lavatory Tempering Valve, Tempering ValveReferanser PowersControls.ca KRAFTER | Watts merkevarer Om forslag 65 | WattBrukermanual

Providing an overview of the various sources and impacts of noise with a review of the ICAO Balanced Approach to Aircraft Noise Management

OIL TANK VALVE CPL. available for sale at KTM Newcastle.

lfe480-10q

Safety management concepts from a holistic point of view, supporting an in-depth understanding of factors that influence safety outcomes in an organization

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket *Kommentar * Navn Epost Nettsted Lagre navnet mitt, e -postadressen og webnettsted i denne nettleseren for neste gang jeg kommenterer.

The Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without charge, equipment found to be defec-tive in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material not manufactured by it.

For operations and corporate airport personnel, this diploma combines courses in different areas of airport operations to enhance your knowledge.