Unless you are experienced at plumbing work, it's best to call a plumber. The installation may require repositioning the main water shutoff valve to create the necessary space for the water pressure regulator.

Alternatively, the screw can be loosened to allow water to flow more freely through the valve, increasing the outgoing water pressure.

Clothes washers, dishwashers, and some other household appliances have built-in pressure regulators. Even so, a whole-house water pressure regulator offers protection to those appliances, and it protects all the pipes and fixtures throughout the house.

It is common for municipal water supplies to enter the home with pressures as high as 150 or 200 psi. If such high pressure is present regularly, the strain can eventually cause joints to fail, faucets and other fixtures to leak, and appliances to break down.

Screw the pressure gauge onto any hose bib or washing machine faucet. Turn on the cold water tap to measure the water pressure. If the pressure is between 40 and 60 psi, there is no need for a regulator. However, if the water pressure is over 80 psi, it is probably causing excessive stress on pipes, fittings, and fixtures.

Apprentices are trained in safe working habits and procedures, in accordance with applicable safety standards and regulations. Apprentices l... + Read More

Apprentices become skilled at completing labs developed to apply various plumbing system principles, such as fabrication, troubleshooting an... + Read More

A water pressure regulator is a valve that reduces the incoming water pressure to a manageable level for the home plumbing infrastructure. Water pressure regulators are installed where the main water line enters the home, just after the main shutoff valve.

Apprentices become skilled at planning, designing, drawing, installing, testing and commissioning a complete four-piece fixture installation... + Read More

An adjustment screw on the top of the regulator can be tightened to increase the tension on the inner spring. This reduces the water pressure as it exits the valve).

A water pressure regulator can last from four to 12 years in a healthy plumbing system. However, most manufacturers recommend replacing them about once every five years to limit the potential damage high water pressure could cause to the plumbing infrastructure.

Timothy Dale is a home repair expert and writer with over a decade of hands-on construction and home improvement experience. He is skilled in residential, commercial, industrial and institutional plumbing, electrical, carpentry, installation, renovations, and project management.

Apprentices are brought up to date on the standard plumbing terms and definitions for the purpose of understanding and interpreting the prov... + Read More

Apprentices learn to define, identify and describe the installation requirements for municipal and private water supplies and sewage disposa... + Read More

Test the water pressure at least once a year. If the regulator's adjustment screw no longer has any effect on changing the water pressure, it's time to replace the valve.

A water pressure regulator is a dome-shaped brass fitting generally found just past the main shutoff valve, where the main water line enters the house. It usually has an adjustment screw on top.

This site uses cookies to offer you a better browsing experience. Find out more on how we use cookies and how you can change your settings.

If you choose to complete this job independently, you must purchase the necessary parts and tools, including threaded couplings, a pipe cutter, grit cloth, flux paste, solder, and a blow torch.

Apprentices are employed as plumbers working for plumbing contractors, mechanical contractors, municipalities, plumbing retailers, plumbing wholesalers and consulting firms. Graduates may also become self-employed.

Once you have tracked down the shut-off valve, check the pipes downstream of the valve for a water pressure regulator. If you cannot find one after a lengthy investigation then it's likely that your home does not have a water pressure regulator.

Apprentices become skilled at selecting, identifying, and using various tools and instruments used in the plumbing industry. Knowledge is ap... + Read More

Although it is not necessary for every plumbing installation, a water pressure regulator can be essential when the municipal water supply enters the home at a very high pressure or where water pressure is irregular.

Apprentices learn to read, interpret and apply information from construction drawings and specifications. Plumbing drawings of various compl... + Read More

City water pressure can fluctuate considerably, often increasing at night when the overall load goes down. So, test at various times of the day.

If you don't already have the tools in your workshop, this can significantly affect the cost. However, if you decide to hire a plumber to install the water pressure regulator, the average cost for installation ranges from $250 to $450.

Apprentices are introduced to standard drafting tools and instruments which are used to construct drain plans, stack elevations and isometri... + Read More

Apprentices apply mathematics to develop solutions relating to plumbing installation. Apprentices calculate offsets, pipe sizing, grade and ... + Read More

Welding is a skill essential to the plumbing trade. Competent welding skills are developed at an advanced level. Apprentices learn to weld b... + Read More

Students develop competency in applying area and volume calculations of various geometric shapes, tanks and cylinders. Apprentices learn to ... + Read More

At the end of this program, you qualify to write the Ontario College of Trades Certificate of Qualification as well as the nationally-recognized Red Seal Endorsement exam to qualify to work as a plumber across Canada. Once qualified you can enter the industry as a journeyperson in the plumbing industry.

To determine if you have a water pressure regulator, first locate where the main water line enters the building and find the main shut-off valve for the home. Typically, if you have a water pressure regulator it will be installed directly after the main shut-off valve.

Inside, a water pressure regulator has a variable spring-loaded diaphragm that automatically widens and narrows depending on the amount of water pressure entering the valve.

If you cannot locate your main shut-off valve where the main line enters the home, then you should do a thorough inspection of the basement, garage, or crawlspace to find this valve. Alternately, the shut-off valve location may be listed in a home inspection report.

Programs at Algonquin College are delivered using a variety of instruction modes. Courses may be offered in the classroom or lab, entirely online, or in a hybrid mode which combines classroom sessions with virtual learning activities. Upon registration, each full-time student is provided an Algonquin email account which is used to communicate important information about program or course events.

All students are responsible to supply and use their own personal protective equipment (such as CSA-approved safety footwear, non-tinted protective eyewear, hearing protection, gloves, hard hat) as required in each lab environment.

be currently employed in the trade be formally registered as apprentices with the Ministry of Labour, Training and Skills Development (MLTSD) have a valid Offer of Classroom Training from the Ministry of Labour, Training and Skills Development that includes your Ministry Client ID and approved Class Number...(read more)

During the test, ensure that water isn't being used anywhere else in the house, such as at garden spigots or appliances.

Data is currently unavailable for this program. Please take a moment to report this via our Website Feedback Form. Thank you!

For Registered Apprentices: This program fulfills the in-class requirements for your apprenticeship. It is divided into three levels (Beginner, Intermediate, Advanced) where you alternate between going to class for 8 weeks and honing your skills through working in the field for 8 - 12 months.

Apprentices learn to read and interpret industrial, commercial and institutional drawings and specifications for plumbing and hydronic syste... + Read More

Plumber is a compulsory skilled trade in Ontario and requires a Certificate of Qualification to work in Ontario. For employment outside Ontario, a plumber must have a Red Seal Endorsement (RSE).

The cost of a water pressure regulator installation depends on whether you hire a professional plumber to complete the work or if you have the necessary skills, knowledge, and experience for a DIY installation. Typically, water pressure regulators cost about $50 to $100 on average, though you could end up paying up to $200 depending on the size of incoming water line.

Apprentices learn the basic functions of plumbing systems including piping materials; supports and hangers; drainage terms and definitions; ... + Read More

If the water pressure is too high, it can cause significant damage to the valves, faucets, appliances, pipes, and plumbing fittings. When the system is protected by a water pressure regulator, there is less stress on the inner valves of appliances, faucets and shutoff valves will be less likely to leak, and fluctuations in water pressure are evened out.

Replacing an existing water pressure regulator is relatively easy. A water pressure regulator should be installed immediately after the main valve, using a set of threaded couplings to secure the water pressure regulator.

A water pressure regulator reduces the flow of water into the home to limit the strain on the plumbing infrastructure. High water pressure can cause many plumbing problems, so it is important to keep it under control.

Welding is a skill essential to the plumbing trade. Competent welding skills are developed at a basic level. Apprentices are provided with i... + Read More