A hot water tempering valve also commonly referred to as a hot water mixing valve, is temperature activated and fully adjustable to produce a hot water output of between 40 to 50 degrees Celsius.

If you’re after quality hot water tempering valves for your plumbing service, take advantage of our free shipping on every order and our free returns policy.

While both tempering valves and TMVs control the temperature of the heated water coming out of the taps, there are some notable differences between the two.

It’s more common for TMVs to be installed in public buildings as they are more expensive but have a higher degree of accuracy. Plus, they tend to last longer than tempering valves. In general, the recommendation is to replace the O-rings and thermostats every 5 years.

Bell & Gossett PT expansion tanks are designed to absorb the force of thermal expansion in domestic potable water systems.

Hot water tempering valves and TMVs (thermostatic mixing valves) are often confused with each other because they serve a similar purpose. Both valves are designed to control the temperature of the hot water that flows from the taps inside a home.

A thermostatic mixing valve operates in response to the thermal activity of the water. It will mix cold water with hot water before the hot water is sent through the taps into the home.

At Forge Plumbing, we stock both the standard (yellow cap) and high performance (orange cap) hot water tempering valves for all residential plumbing installations. We have both tempering valves in two sizes - 15mm and 20mm.

Both hot water tempering valves and thermostatic mixing valves mix cold and hot water together to ensure a preset hot water temperature that comes out of the hot water taps.

Hot water tempering valves are commonly installed on every new household hot water service or during a hot water repair because they are cheaper to purchase and can be installed by any licensed plumber. On the other hand, the plumber needs a special licence to install a TMV.

Dormont Gas Hoses & Connectors. Dormont Hose Kit. 1650KIT36 - 1/2" x 36" BP Hose - 1/2" Quick Disconnect - 1/2" Ball Valve - (2) 1/2" Street Elbows - 36" ...

TMVs are more accurate in their temperature control and respond faster to water temperature changes. While hot water tempering valves are accurate to 3 degrees Celsius + or -, TMVs are accurate to 1 degrees Celsius + or -.

Feddersen is non-binding. In particular, it does not constitute any guaranteed quality features. Unless agreed otherwise, K.D. Feddersen assumes no liability ...

Hydrants · Exposed Wall Hydrant · Exposed Wall Hydrant · Exposed Mild Temp Hose Bibb · Exposed Wall Hydrant · Encased Wall Hydrant · Encased Wall Hydrant · Encased ...

Trap seal primers are a necessity where floor drains are infrequently used and in areas such as mechanical and service rooms. In surprisingly little time, ...

A hot water tempering valve blends cold water with the hot water stored in the hot water unit so that the hot water that comes out of the taps is at a safe temperature. For most hot water installations this would be around 40 to 50 degrees Celsius.

At the same time, the tempering valve ensures that the hot water stored inside the hot water system sits at a temperature no less than 60 degrees Celsius in order to eliminate any bacteria from the storage tank.

A WaterBoss will simultaneously reduce dirt and sediment, sand, or debris from wells or pipes, down to 20 microns.

For any questions or advice about the wide range of plumbing supplies we stock, feel free to contact our friendly customer service team who will be more than happy to help you.

For this reason, the plumbing code requires that TMVs are installed in high risk facilities such as hospitals, aged care facilities, nursing homes, schools, childcare centres, hotels, respite centres and shopping centres.

Please contact tekmar customer service to check for compatibility of products manufactured prior to this date. The 485 software is designed to update. This ...

This ensures that people who are more at risk from scalding by hot water, such as young children and the elderly, are fully protected.

This control regulates a single heating water temperature through Outdoor Temperature Reset and/or setpoint/DHW target control. It is capable of controlling ( ...

The desired temperature of the hot water output is set by a qualified plumber during installation. The TMV has an element that responds to the temperature of the water and mixes cold water with the hot water so that the hot water that comes out of the taps at a maximum temperature of 50 degrees Celsius.

A potable expansion vessel is essentially a safety net for your plumbing system - A specialised component designed to handle the expansion of water as it's ...

2022119 — A RPZ valve prevents this by stopping potentially contaminated water back-siphoning into a water supply that is used for drinking water. Do I ...

The plumber can also easily replace the tempering valve once it gets to the end of its useful life. According to Australian Standard Regulations, tempering valves should be tested every 12 months to ensure they’re in good working order.