This standard air gap faucet with brushed stainless steel finish is designed for dispensing water from a reverse osmosis or water filtration system.

Series PLT Potable Water Expansion Tanks are designed to absorb the increased volume of water created by thermal expansion and to maintain balanced pressure ...

Shop our variety of Boiler Drain Male or view full catalog pages.

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

The MTB thermostatic mixing valve for DHW to be installed at the outlet of the water heater. Mixed water setting range: 30/65°C. Maximum static pressure: 10 ...

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Washing Machine Smart Water Shutoff Valve, Water Shutoff, Pipe Size 1/2 in Inlet, 3/4 in Outlet, Socket Inlet, Threaded Outlet Connection, Max. Pressure 150 ...

#0204155 3/8 LFUSG-B-QC-SC-M3 WATTS ... For Availability and Shipping Estimate: Pls call/Text us @ 773-719-1452 or E mail customer@zainabsupplies,Shipping Charges ...

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.

The mini dual check valves are primarily designed to provide protection from potential contamination to the potable water supply in low hazard applications for individual fixtures.

The Ames C200 is a double check valve assembly (DCA). It is available in 2 1/2″-10″ sizes and has been in production since 2000.

The mini dual check valves are primarily designed to provide protection from potential contamination to the potable water supply in low hazard applications for individual fixtures.

WATTS® Reduced Pressure Zone Assembly, Series: LF009M2-QT-S, 1 in Nominal, NPT, 175 psi, 33 to 180 deg F, Quarter-Turn Ball Valve, Full Port, Cast Copper Silicon Alloy Body, 14-1/2 in L, Domestic

Our range of backflow prevention devices are manufactured in our WA factory and approved to AS/NZS 2845.1. Constructed from dezincification resistant (DR) brass the units consist of two independently acting internally loaded check valves. With a low hazard rating the units perform to a maximum temperature of 60 degrees celsius and a maximum pressure of 1200kPa. All units can be installed vertically or horizontally however they must not be subject to flooding or freezing.

WATTS® 0122693 LF009M2-QT-S Reduced Pressure Zone Assembly, 1 in Nominal, NPT End Style, Quarter-Turn Ball Valve, Cast Copper Silicon Alloy Body, Domestic

AMES 2000SS/3000SS 6'; 2000SE 8' #1 CAM CHECK ASSEMBLY. Your Price: $490.52. AM17010098. Part Number: 1471. Availability: In Stock.

Series LF009 Reduced Pressure Zone Assemblies are designed to protect potable water supplies in accordance with national plumbing codes and water authority requirements. This series can be used in a variety of installations, including the prevention of health hazard cross connections in piping systems or for containment at the service line entrance. The LF009 features Lead Free construction to comply with Lead Free installation requirements. This series features two in-line, independent check valves, captured springs and replaceable check seats with an intermediate relief valve. Its compact modular design facilitates easy maintenance and assembly access.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

Series 9D Dual Check Valves with Intermediate Atmospheric Vent prevent the reverse flow of hot or cold polluted water from entering into the potable water ...

Our range of backflow prevention devices are manufactured in our WA factory and approved to AS/NZS 2845.1. Constructed from dezincification resistant (DR) brass the units consist of two independently acting internally loaded check valves. With a low hazard rating the units perform to a maximum temperature of 60 degrees celsius and a maximum pressure of 1200kPa. All units can be installed vertically or horizontally however they must not be subject to flooding or freezing.

20231012 — De gemeente Brummen is voornemens om een deel van het bedrijfspand, gelegen aan de Kollergang. 14, 6961 LZ te Eerbeek te verkopen aan ...