A pressure regulator is a device used to reduce and regulate the water pressure entering a drip system so it matches the pressure needed by the system. The Drip Store's range of basic pressure regulators offers exceptional outlet pressure control and provides consistent performance at flow rates from 6 to 480 gph. These regulators are preset to their stated pressure and utilize minimal moving parts, with a sophisticated diaphragm design that regulates itself in reaction to the overall back pressure in the system. All of our preset pressure regulators use high strength ABS plastic material and all joints are sonic welded into an impact-resistant plastic housing.

WattsLF009spec Sheet

Buy 294 294 Tekmar 4 STAGE BOILER CONTROL from Building HVAC.

lf0093/4

Basic pressure regulators are listed below, ranging from 10 psi to 30 psi with both hose thread and pipe thread ends. Most drip systems operate best at 25 psi, but you can always call us to discuss which regulator is best for your system. All of the below regulators are 3/4" in size, regardless of thread type.

DORMONT MANUFACTURING. Dormont. Headquarters: Export, Pennsylvania. Baumen ... As the inventors of the first moveable gas connector, Dormont's USA-based factory ...

Wilo is a world leader in circulator pumps, combining top-rate performance, German engineering and world-class materials, our high-efficiency pumps are ...

What's in your water? Crystal Quest utilizes the latest technology in the water filtration industry to bring you the cleanest, finest, filtered water ...

wattslf0091"

wattslf0093"

2013116 — Our house had water hammering and low pressure problems. We bought ... The original pressure regulator is a Watts N35B-Z3 SZ1. It is no ...

Zurn® Wilkins Pressure Reducing Valve, Lead Free, Series: 70XL, 3/4 in Nominal, Double Union Female C, 300 psi, 140 deg F, Media: Water, 6 in Inlet to ...

Prince William Water is responsible for maintaining records on testable backflow prevention devices connected to the public water distribution system.

wattslf0092"

2023328 — A backflow preventer stops contaminated water from flowing back into the public water supply. Without it, pollutants can enter the water supply and compromise ...

34-NR3XLDUPEX Zurn Wilkins 3/4" NR3XL Pressure Reducing Valve with double union FNPT connection and a male barbed connection tailpiece 3/4" NR3XL Pressure ...

The Watts LF009 is a reduced pressure assembly (RPA). It is available in 1/4″-1/2″ sizes and has been in production since 2010. The body is made of bronze.

We'll answer your questions before you ask them: Yes you need a pressure regulator, and No there is no "standard pressure." What pressure you get at your hose spigot can vary wildly depending on your state, city, and neighborhood, the condition of your local plumbing system, where you are in relation to the nearest pump station, if you're at the top or bottom of a hill, and a bunch of other factors. Since your drip system needs a fairly low pressure, it's best to always use a pressure regulator.

Series PLT potable water expansion tanks are designed to absorb the increased volume of water created by thermal expansion and to maintain balanced pressure ...