Easiest way to replace pressure regulator valve - n35b pressure regulator

 2024-09-04 08:09:34

Max GPM Flow: 29gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed Corded: Yes AM10-S3FV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM10 4 Bolt flanged 3 Speed with BICV, line cord and timer.

AMK-WS Instruction Sheet On-Demand Wireless Control Kit – Wall Switch and Receiver (Switch available separately AM-WSR)

Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed AMR-S3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Half Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM3-SUCV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM3 with 1/2″ Union Sweat Fittings, BICV, Line Cord and Timer

SO75T Submittal Data Sheet 3/4″ NPT Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

To run the circulator with timer is approx. $3.00 to $8.00 annually. Our hot water recirculation kits have a estimated payback one to three year depending on the kit.

SO125S Submittal Data Sheet 1-1/4″ Sweat Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Connection Type: Flange Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH2K-R Instruction SheetSubmittal Data SheetBrochure AMH2K-R is designed for dedicated return line systems with tankless water heater up to 600 feet of pipe length. Installs near heat source on Return Line Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Built-in Mechanical Timer Meets Title 24 California

AMR-SF2, TwinTurbo Stainless Steel, HeadFt:36 GPM:14 AMR-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:36 GPM:13

Replacement cartridge for the AM7 circulator and the Taco 007 circulators. The CT07 replaces the Taco part RP007-042RP and 007-042 at 20-40% lower cost

FK100 Submittal Data Sheet 1″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

The AMRe replaces the Taco oo7 oo7e 0015 0015e 1816e 0018e, Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

AMH3K-7 is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks

AMK-ODR Valve Kit Instruction SheetSubmittal Data SheetBrochure The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with a circulator to supply hot water ON DEMAND or Built-in Timer on pump. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called for using an On-Call control or Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. A Hot Water Circulator must be installed at the tankless.

Max GPM Flow: 29gpm Max Head Feet: 12ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed AM10-S3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

Aqua-Flash® AMK-UK Instruction SheetSubmittal Data SheetBrochure Aqua-Flash® AMK-UK Universal Kit Bypass Valve, Hose and Tee For Hot Water Tanks and Indirect Heaters The new AMK-UK brass and stainless valve kit with bi-metal coil provides 90° F hot water to every faucet. It does not require power under the sink The AMK-UK has a unique advantage, it can handle larger pump pressures up to 21 ft. hd. and provide quiet operation. The kit includes valve, hose and tee and can be installed quickly onto the cold angle stop. A hot water circulator needs to be installed at the hot water tank. Additional Under-sink bypass valve kits- up to 5 per pump. To be used with AMH1K-3UV AquaMotion , 70600 Nevercold, and FT1 APCOM.

Install a proven, awarded AquaMotion recirculation system. One system is available for every type of installation, hot water tanks or tankless.

The NEW AMRe-FVL High Efficiency ECM circulator for heating with IRON GUARD™ is fully automatic, no buttons to push, steel circulator with stainless cartridge. Does not require iron filter in the system to protect the circulator. External iron filter cost as much as the pump. 6 1/2 ft. replaceable line cord included to save money an time on installation. High performance of 20 ft. x 18 GPM, 120/1/60, low 45 watt draw, universal 2 bolt flange with nut retainer, built-in check valve, replaceable cartridge, a green sustainable product.

Aretrap primersrequired by code

Type of Hot Water Heater: Tank Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-7N Instruction SheetSubmittal Data SheetBrochure AMH2K-7N is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of pipe length. Built-in Aquastat that senses water temperature (On at 85F/ Off at 105F degrees) to minimize run time. Save up to 15,000 gallons of water per year for a family of 5 Kits include 1 AM7-SUVA1L1 pump, 10 foot cord, (2) 3/4″ NPT male Union Tail Pieces, (2) Union Nuts, (2) Union Gaskets Add On Demand (5 Minute Run time) to turn On. Meets Title 24 California

AQUA-ON DEMAND™ for TANKLESS HEATER (N) NO TIMER- USE WITH ON DEMAND CONTROL– For up to 100 Ft. of total pipe length and tankless minimum Flow Rate of .4 GPM or less AM7-SUEV1L Stainless Union circulator, Built-In check valve, 1” union with ¾” extended tailpieces with flat for mounting,with 10 ft. line cord, includes the AMK-ODR valve kit with Bypass valve on/off 95°-104°F, hose, Tee. The ODR valve installs on the cold angle stop. AMK-WB On Demand Remote RF Wireless Control with Adjustable Receiver and Cord. -No Wiring Required, up to 5 AMK-WB or AMK-MS or AMK-WS or mixed per Receiver

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AM10-S3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

Max GPM Flow: 17gpm Max Head Feet: 11ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM7-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-FV1 uses standard 2-bolt circulator flanges for easy installation. Circulator comes with BICV™ built in check valve. Our AM7 circulator replaces Taco 007 and other model circulators.

Aqua-Ready™ With an Amp draw of only 0.46 amps the AM3 3/4″ NPT offers high performance and high efficiency. All stainless steel models are fully lead free.

For TANKLESS HEATER WITHOUT BUILT-IN PUMP for Single Pipe Systems AM6 AquaMotion Stainless Steel Circulator with a built-in timer and a 10 Ft line cord. AMK-ODR bypass valve kit (ODR Valve, 2 Ft. Stainless Steel Hose & Tee), Bypass Tee 3/4” MNPT x 3/4” MNPT x 3/8” OD Compression Two 3/4″ NPT Male Tail Pieces with 1” Union Nuts and Gaskets, 2 Ft. Stainless Hose.The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with the circulator to supply hot water using the Built-in Timer. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature.

With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.

With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Max GPM Flow: 20gpm Max Head Feet: 20ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Variable Speed Corded: Yes AM55-FVL Instruction SheetSubmittal Data SheetBrochure AM55-FVL Cast Iron Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. * Use an iron filter when installing circulator in existing systems to avoid problems with iron oxides. Circulator comes with BICV™ built in check valve. The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

AM10-SF3, TwinTurbo Stainless Steel HeadFt:24 GPM:29 AM10-SFV3, TwinTurbo Stainless Steel with check valve HeadFt:24 GPM:28

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-7ODRXZT1 Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH1K-7ODRXZT1- Single Pipe Aqua-Shield™ Circulator for Outdoor Installation. Installs on Tankless Heater without built-in pump for Single Pipe Installation. For up to 250 ft. of total pipe length and tankless Flow requirement of .4 GPM or less AM7-SU1LXZT1 Stainless Union Circulator with 3/4″ Male Tailpieces, with outdoor enclosure, water, sprinkler, bug, freeze protected, anti-tampering locking device tab, built-in timer, 10 ft. line cord, pump bypass connection, check, flow control, hose, bypass Tee 3/4″ FNPT x 3/4″ MNPT x 3/8″ OD Compression. AMK-ODR bypass valve kit: Bypass valve, hose, Tee. Valve maintains 95° F. Installs under sink on the cold angle stop and no power required under sink. Patented.

With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Connection Type: 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-RODRXT1 Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH1K-RODRXT1 Single Pipe with On Demand AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, USE WITH ON DEMAND- For up to 600 Ft. of total pipe length and tankless for all minimum flow rates. Stainless high speed circulator, flanged, 10 ft. line cord, with outdoor enclosure, for water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95F degrees) installs under fixture, Includes AMK-WB ON DEMAND-FK75S 3/4″ Stainless Flanges Included. Patent pending. – . Meets CA Title 24 with On Demand. Freeze protection does not work with this model because of the On Demand Kit. Aqua-Shield Outdoor Tankless Single Pipe for up to 600 ft. of total pipe with On Demand

With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free.

Max GPM Flow: 12gpm Max Head Feet: 18ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM8-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Stainless 4 bolt flange

Max GPM Flow: 18gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Union_Half Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM7-SUCV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AM7 Stainless with 1/2″ Union Sweat Fittings, BICV, line cord and timer.

P-Trap primer

Type of Hot Water Heater: Tank Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-7 Instruction SheetSubmittal Data SheetBrochure AMH2K-7 is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of total pipe length. Built-in Aquastat that senses water temperature (On at 85F/ Off at 105F degrees) to minimize run time. Save up to 15,000 gallons of water per year for a family of 5 Kits include 1 AM7-SUVA1LT1 pump, 10 foot cord, (2) 3/4″ NPT male Union Tail Pieces, (2) Union Nuts, (2) Union Gaskets Built-in Mechanical Timer Meets Title 24 California

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-RODRN Instruction SheetBrochure AQUA-ON DEMAND™ for TANKLESS HEATER WITHOUT BUILT-IN PUMP WITH SINGLE PIPE FOR UP TO 600 FT. OF TOTAL PIPE LENGTH- (N) NO TIMER- INCLUDES AMK-WB ON DEMAND AMR-SFVL1 flanged stainless high speed circulator with 10 ft. line cord, ¾” stainless Female NPT flange kit, AMK-WB On Demand Push Button with Receiver, Includes the AMK-ODR valve kit with valve, hose, Tee. Valve maintains 95°F The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. Meets Title 24 California

Additional Under-sink bypass valve kits- up to 5 per pump. To be used with AMH1K-3UV AquaMotion , 70600 Nevercold, and FT1 APCOM.

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat, Union Check Valve: Yes Pump Speed: Single Speed AM6-SUEV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM6 circulator replaces Taco 006 models and other model circulators.

ElectronicTrap Primers

Max GPM Flow: 5gpm Max Head Feet: 10ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM1-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure AM1 Stainless 3/4″ NPT (Replaces AM2)

AMK-CB Instruction Sheet On-Demand Air Actuated Counter Control Kit – Wireless Button and Receiver (Button available separately AMK-CBW) For use with the AMH3K-7, AMH3K-7N, AMH3K-R & AMH3K-RN Under sink recirculation kits.

Check Valve: Yes Aqua-Max™ APB30 Pressure Booster Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Max™ APB30 boosts domestic water pressure in residential homes by 30 psi to all fixtures and sprinkler heads. Use it where the city/ town/ well water delivers insufficient pressure. Automatically Starts when water is drawn & stops when demand ends, No Short Cycling increases pressure after water demands ends, Simple Installation plumbs into incoming water line & plugs into 115V wall fixture, Compact Design easy installation 14″ x 14″ x 11″, Quiet Operation totally enclosed fan cooled motor, Stainless Steel Pump Construction for corrosion resistance & reliability, Composite Control with reinforced brass connections, Built in check valve eliminates back flow of cold to main, Mounting Base can be attached to floor or wall, Wash down Enclosures control and motor are sealed to prevent water entry, Drain and Fill Plugs for quick filling and venting. 1/2 hp and 3.3 Amps

How dotrap primerswork

Max GPM Flow: 16gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMR-S3FV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AMR Stainless 4 bolt flanged 3 Speed pump with BICV, line cord and timer.

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM3-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free. Our AM3 circulator replaces Taco 003 models and other model circulators.

The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

AM55-FVL Cast Iron Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. * Use an iron filter when installing circulator in existing systems to avoid problems with iron oxides.

AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, For up to 250 Ft. of total pipe length and tankless Flow requirement of .4 GPM or less, Stainless single speed circulator with union connections, 10 ft. line cord, with outdoor enclosure, water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95 F degrees) installs under fixture, Includes AMK-WB On Demand- UK75T 3/4″ Threaded Male Fittings Included -Meets CA Title 24 with On Demand. Patent pending. Freeze protection does not work with this model because on the On Demand Kit.

Connection Type: Union_Three_Quarter: Union 3/4" Sweat, Union UK75 Sweat Union Kit for Stainless Union Pumps Instruction SheetSubmittal Data SheetCurvesBrochure Two Unions with two 3/4″ Sweat Tail Pieces, Gaskets

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-6ODRZT1 Instruction SheetSubmittal Data SheetBrochure For TANKLESS HEATER WITHOUT BUILT-IN PUMP for Single Pipe Systems AM6 AquaMotion Stainless Steel Circulator with a built-in timer and a 10 Ft line cord. AMK-ODR bypass valve kit (ODR Valve, 2 Ft. Stainless Steel Hose & Tee), Bypass Tee 3/4” MNPT x 3/4” MNPT x 3/8” OD Compression Two 3/4″ NPT Male Tail Pieces with 1” Union Nuts and Gaskets, 2 Ft. Stainless Hose.The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with the circulator to supply hot water using the Built-in Timer. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. New video here!

SO75S Submittal Data Sheet 3/4″ Sweat Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with a circulator to supply hot water ON DEMAND or Built-in Timer on pump. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called for using an On-Call control or Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. A Hot Water Circulator must be installed at the tankless.

FK150 Submittal Data Sheet 1-1/2″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

AMR-SF3, TwinTurbo Stainless Steel, HeadFt:41 GPM:17 AMR-SFV3, TwinTurbo Stainless Steel with check valve, HeadFt:41 GPM:16

AMK-T Instruction Sheet Digital Timer with adjustable 7-day functions, as well as power failure protection that keeps its settings even after power outage or when unplugged

Type of Hot Water Heater: Tank Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH3K-7 Instruction SheetSubmittal Data SheetBrochure AMH3K-7 is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks Fully automatic system installs under sink Requires electrical outlet at sink No cutting of pipe Built-in Mechanical Timer Uses Built-In Non-Adjustable Aquastat (On at 85F/ Off at 105F degrees) Meets Title 24 California New Installation Video Here- Please note the red tailpiece is installed on the left side for Hot.

FK75S Submittal Data Sheet 3/4″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Floor draintrapprimer installation

AMK-WB Instruction Sheet On-Demand Wireless Control Kit – Wireless Button and Receiver (Button available separately AMK-WBR)

Kit includes: Stainless pump with 3/4″ FNPT union, built-in timer, 10 ft. line cord, bronze by-pass valve (with check valve), 2 ft. NSF hose & Tee

Max GPM Flow: 17gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AMR-S3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

Digital Timer with adjustable 7-day functions, as well as power failure protection that keeps its settings even after power outage or when unplugged

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM10-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Stainless 4 Bolt Flange

Max GPM Flow: 20gpm Max Head Feet: 11ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM7-F1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-F1 uses standard 2-bolt circulator flanges for easy installation. Our AM7 circulator replaces Taco 007 and other model circulators.

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH2K-RN Instruction SheetSubmittal Data SheetBrochure AMH2K-RN is designed for dedicated return line systems with tankless water heater up to 600 feet of total pipe length. Installs near heat source on Return Line Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Add On Demand Kit (5 Minute Run Time) to turn On Meets Title 24 California

Max GPM Flow: 11gpm Max Head Feet: 18ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM8-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Stainless 4 bolt flange with built-in check valve

The new AMK-UK brass and stainless valve kit with bi-metal coil provides 90° F hot water to every faucet. It does not require power under the sink

Max GPM Flow: 16gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed Corded: Yes AM7-ST1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AM7 Stainless 3/4″ NPT with line cord and timer.

Aqua-Shield™ Circulator for Outdoor Installation. Installs on Tankless Heater without built-in pump for Single Pipe Installation. For up to 250 ft. of total pipe length and tankless Flow requirement of .4 GPM or less

AM10-SF2, TwinTurbo Stainless Steel, HeadFt:21 GPM:24 AM10-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:21 GPM:23

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Cast Iron Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM10-F1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Cast Iron 4 bolt Flange

AMK-MS Instruction Sheet On-Demand Wireless Control Kit – Motion Sensor and Receiver (Motion Sensor available separately AMK-MSR)

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation.

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AM10-3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.

AMH2K-7 is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of total pipe length.

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Pump Speed: Single Speed Corded: Yes AMH1K-7ODRXT1 Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, For up to 250 Ft. of total pipe length and tankless Flow requirement of .4 GPM or less, Stainless single speed circulator with union connections, 10 ft. line cord, with outdoor enclosure, water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95 F degrees) installs under fixture, Includes AMK-WB On Demand- UK75T 3/4″ Threaded Male Fittings Included -Meets CA Title 24 with On Demand. Patent pending. Freeze protection does not work with this model because on the On Demand Kit.

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM6-SUEV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM6 with 3/4″ Union Sweat Fittings, BICV, Line Cord and Timer.

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH3K-R Instruction SheetSubmittal Data SheetBrochure AMH3K-R is designed for standard plumbing systems up to 600ft of total pipe length. Fully automatic system installs under sink Rubber mount Requires electrical outlet at sink Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Built-in Mechanical Timer Meets Title 24 California

Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM7-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure AM7 Stainless with 3/4″ NPT 11×14 GPM

Max GPM Flow: 29gpm Max Head Feet: 12ft Material: Cast Iron Connection Type: Flange Check Valve: Yes Pump Speed: Three Speed AM10-3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

Max GPM Flow: 18gpm Max Head Feet: 9ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM5-F1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. Our AM5 circulator replaces Taco 005, Grundfos, Xylem and Armstrong Pumps per Cross Reference Chart.

The Problem How long do you wait for hot water? 30 seconds, 1 minute, 2, more? A home can waste up to 15,000 gallons of water a year. You pay for the water, energy and sewage fees. The Solution Install a proven, awarded AquaMotion recirculation system. One system is available for every type of installation, hot water tanks or tankless. The Benefits Hot Water at Every FaucetSave Time, No More WaitingSave Hot Water, 12,000 – 15,000 Gallons a YearSave on Utility and Sewer Bills The Cost To run the circulator with timer is approx. $3.00 to $8.00 annually. Our hot water recirculation kits have a estimated payback one to three year depending on the kit. MORE ABOUT RECIRCULATION AND THE ACCESSORIES AVAILABLE Choosing Your Recirculation Kit How do you heat your water? Click on your type. Hot Water Tankand boilers. Tankless HeaterIndoors Tankless HeaterOutdoors What type of plumbing do you have? Click on your type. Single PipeEnds with last fixture. Dedicated ReturnReturns to heater. Not sure? Ask a plumber. Products below are based on your selections above.

FK150S Submittal Data Sheet 1-1/2″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Aqua-Max™ APB30 boosts domestic water pressure in residential homes by 30 psi to all fixtures and sprinkler heads. Use it where the city/ town/ well water delivers insufficient pressure. Automatically Starts when water is drawn & stops when demand ends, No Short Cycling increases pressure after water demands ends, Simple Installation plumbs into incoming water line & plugs into 115V wall fixture, Compact Design easy installation 14″ x 14″ x 11″, Quiet Operation totally enclosed fan cooled motor, Stainless Steel Pump Construction for corrosion resistance & reliability, Composite Control with reinforced brass connections, Built in check valve eliminates back flow of cold to main, Mounting Base can be attached to floor or wall, Wash down Enclosures control and motor are sealed to prevent water entry, Drain and Fill Plugs for quick filling and venting. 1/2 hp and 3.3 Amps

The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature.

FK100S Submittal Data Sheet 1″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Pump Speed: Single Speed Corded: Yes AMH1K-7ODRN Instruction SheetBrochure AQUA-ON DEMAND™ for TANKLESS HEATER (N) NO TIMER- USE WITH ON DEMAND CONTROL– For up to 100 Ft. of total pipe length and tankless minimum Flow Rate of .4 GPM or less AM7-SUEV1L Stainless Union circulator, Built-In check valve, 1” union with ¾” extended tailpieces with flat for mounting,with 10 ft. line cord, includes the AMK-ODR valve kit with Bypass valve on/off 95°-104°F, hose, Tee. The ODR valve installs on the cold angle stop. AMK-WB On Demand Remote RF Wireless Control with Adjustable Receiver and Cord. -No Wiring Required, up to 5 AMK-WB or AMK-MS or AMK-WS or mixed per Receiver Meets Title 24 California

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH3K-RN Instruction SheetSubmittal Data SheetBrochure AMH3K-RN is designed for standard plumbing systems with hot water pipe length up to 600ft of total pipe length. Fully automatic system installs under sink Rubber mount Requires electrical outlet at sink Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Add On Demand Kit (5 Minute Run Time) To Turn On Meets Title 24 California

AMH3K-7N is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks

Trapprimer for floor drain

With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free.

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-F1 uses standard 2-bolt circulator flanges for easy installation.

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed Corded: Yes AM3-ST1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ With an Amp draw of only 0.46 amps the AM3 3/4″ NPT offers high performance and high efficiency. All stainless steel models are fully lead free. Circulator comes with Line Cord and Timer. Our AM3 circulator replaces Taco 003 models and other model circulators.

Max GPM Flow: 29gpm Max Head Feet: 11ft Material: Cast Iron Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM10-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Cast Iron 4 bolt Flange with built-in check valve

Max GPM Flow: 11gpm Max Head Feet: 8ft Connection Type: NPT Pump Speed: Single Speed AM6-ST1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM6 with 3/4″ NPT includes Line Cord and Timer.

With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation.

AM55-SFVL Stainless Steel Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. It has a universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Max GPM Flow: 17gpm Max Head Feet: 21ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AMR-3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

Max GPM Flow: 16gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM7-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation. Circulator comes with BICV™ built in check valve. Our AM7-S circulator replaces Taco 007 and other model circulators.

SO100S Submittal Data Sheet 1″ Sweat Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

Max GPM Flow: 16gpm Max Head Feet: 9ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM5-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation. Circulator comes with BICV™ built in check valve. Our AM5 circulator replaces Taco 005 and other model circulators.

ZurnTrapPrimer

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Dedicated_Return Max GPM Flow: 17gpm Max Head Feet: 11ft Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-7X Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH2K-7X -Dedicated Return Line AMH2K-7X for Outdoor tankless with less than .4 GPM flow requirement (union body) Includes: AM7-SUV1AXLT1 and UK75T 3/4″ Threaded Male Fittings For Outdoor Installed Tankless Heater without built-in Pump on Dedicated Return Line Primary Market Southern Tier of the US Outdoor installation saves on expensive air intake, exhausts Easy to service outdoor installed pump Pump freeze protected and water and sprinkler safe Greater choice of tankless models Automatic, built-in thermostat/switch designed for hot climate (115-125 F degrees), timer and 10 ft. line cord Clear cover with Timer visibility Meets Title 24 California (only with Aquastat) Aqua-Shield™ Pat. Pending

Hot Water at Every FaucetSave Time, No More WaitingSave Hot Water, 12,000 – 15,000 Gallons a YearSave on Utility and Sewer Bills

Type of Hot Water Heater: Tank Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH3K-7N Instruction SheetSubmittal Data SheetBrochure AMH3K-7N is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks Fully automatic system installs under sink Requires electrical outlet at sink No cutting of pipe Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Add On Demand Kit (5 Minute Run Timer) to turn On Meets Title 24 California

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Half, Union Check Valve: Yes Pump Speed: Single Speed AM3-SUCV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM3 circulator replaces Taco 003 models and other model circulators.

SO100T Submittal Data Sheet 1″ NPT Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

Max GPM Flow: 18gpm Max Head Feet: 20ft Material: Connection Type: 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMRe-FVL High Efficiency ECM Circulator Instruction SheetSubmittal Data SheetBrochure The NEW AMRe-FVL High Efficiency ECM circulator for heating with IRON GUARD™ is fully automatic, no buttons to push, steel circulator with stainless cartridge. Does not require iron filter in the system to protect the circulator. External iron filter cost as much as the pump. 6 1/2 ft. replaceable line cord included to save money an time on installation. High performance of 20 ft. x 18 GPM, 120/1/60, low 45 watt draw, universal 2 bolt flange with nut retainer, built-in check valve, replaceable cartridge, a green sustainable product. The AMRe replaces the Taco oo7 oo7e 0015 0015e 1816e 0018e, Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

Type of Hot Water Heater: Tank Type of Household Plumbing: Single_Pipe Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-3UV Instruction SheetBrochure AQUA-FLASH® Recirculation Kit for hot water tanks with single pipe: AMH1K-3UV Kit includes: Stainless pump with 3/4″ FNPT union, built-in timer, 10 ft. line cord, bronze by-pass valve (with check valve), 2 ft. NSF hose & Tee Delivers Instant Hot Water Comfort in a Flash to Every Tap on the same line. No electrical connection required under sink. Ideal for pedestal sink installations Built-in Mechanical Timer New Video Here!

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Dedicated_Return Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-RX Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH2K-RX- Dedicated Return Line Outdoor Recirculation Pump AMH2K-RX for Outdoor tankless Includes: AMR-SFV1AXLT1 (flanged body) and FK75S 3/4″ Stainless Flanges For Outdoor Installed Tankless Heater without built-in Pump on Dedicated Return Line Primary Market Southern Tier of the US Outdoor installation saves on expensive air intake, exhausts Easy to service outdoor installed pump Pump freeze protected and water and sprinkler safe Greater choice of tankless models Automatic, built-in thermostat/switch designed for hot climate (115-125 F degrees), timer and 10 ft. line cord Clear cover with Timer visibility Meets Title 24 California (only with Aquastat) Aqua-Shield™ Pat. Pending

Max GPM Flow: 18gpm Max Head Feet: 9ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM5-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation. Our AM5 circulator replaces Taco 005 and other model circulators.

Max GPM Flow: 20gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Variable Speed Corded: Yes AM55-SFVL Instruction SheetSubmittal Data SheetBrochure AM55-SFVL Stainless Steel Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. It has a universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

Connection Type: Union_Half, Union UK50 Sweat Union Kit for Stainless Union Pumps Instruction SheetSubmittal Data SheetCurvesBrochure Two Unions with two 1/2″ Sweat Tail Pieces, Gaskets

With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation.

Material: Cast Iron Connection Type: Flange Check Valve: Yes Pump Speed: Single Speed TwinTurbo Instruction SheetSubmittal Data SheetBrochure TwinTurbo Cast Iron or Stainless Steel: 2 AMR or 2 AM10 Pumps wired together set on medium or high speed. Benefits and features: More competitively priced than Higher horsepower single pumps with similar performance Two pumps in series doubles the pressure output of a single pump Pre-wired in series, installation wiring is the same as a single unit Duel pumps allow one to be operated alone or both together On solar drain back systems, both pumps can be used to fill the system and one turned off during operation. Four bolt flange pattern, 12 1/2” flange to flange dimensions for easy installation in new or existing installations Available with or without built in Check Valve (add “V” to part number, i.e. AMR-FV3) Available in Cast Iron and Stainless Steel Construction AMR-F3, TwinTurbo Cast Iron, HeadFt:41 GPM:17 AMR-FV3, TwinTurbo Cast Iron with check valve, HeadFt:41 GPM:16 AMR-F2, TwinTurbo Cast Iron, HeadFt:36 GPM:14 AMR-FV2, TwinTurbo Cast Iron with check valve, HeadFt:36 GPM:13 AM10-F3, TwinTurbo Cast Iron HeadFt:24 GPM:29 AM10-FV3, TwinTurbo Cast Iron with check valve HeadFt:24 GPM:28 AM10-F2, TwinTurbo Cast Iron, HeadFt:21 GPM:24 AM10-FV2, TwinTurbo Cast Iron with check valve, HeadFt:21 GPM:23

FK125 Submittal Data Sheet 1-1/4″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

SO125T Submittal Data Sheet 1-1/4″ NPT Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Pump Speed: Single Speed TwinTurbo-S Instruction SheetSubmittal Data SheetBrochure TwinTurbo Cast Iron or Stainless Steel: 2 AMR or 2 AM10 Pumps wired together set on medium or high speed. Benefits and features: More competitively priced than Higher horsepower single pumps with similar performance Two pumps in series doubles the pressure output of a single pump Pre-wired in series, installation wiring is the same as a single unit Duel pumps allow one to be operated alone or both together On solar drain back systems, both pumps can be used to fill the system and one turned off during operation. Four bolt flange pattern, 12 1/2” flange to flange dimensions for easy installation in new or existing installations Available with or without built in Check Valve (add “V” to part number, i.e. AMR-SFV3) Available in Cast Iron and Stainless Steel Construction AMR-SF3, TwinTurbo Stainless Steel, HeadFt:41 GPM:17 AMR-SFV3, TwinTurbo Stainless Steel with check valve, HeadFt:41 GPM:16 AMR-SF2, TwinTurbo Stainless Steel, HeadFt:36 GPM:14 AMR-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:36 GPM:13 AM10-SF3, TwinTurbo Stainless Steel HeadFt:24 GPM:29 AM10-SFV3, TwinTurbo Stainless Steel with check valve HeadFt:24 GPM:28 AM10-SF2, TwinTurbo Stainless Steel, HeadFt:21 GPM:24 AM10-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:21 GPM:23

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Half, Union Check Valve: Yes Pump Speed: Single Speed AM6-SUCV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM6 circulator replaces Taco 006 models and other model circulators.

FK125S Submittal Data Sheet 1-1/4″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, USE WITH ON DEMAND- For up to 600 Ft. of total pipe length and tankless for all minimum flow rates. Stainless high speed circulator, flanged, 10 ft. line cord, with outdoor enclosure, for water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95F degrees) installs under fixture, Includes AMK-WB ON DEMAND-FK75S 3/4″ Stainless Flanges Included. Patent pending. – . Meets CA Title 24 with On Demand. Freeze protection does not work with this model because of the On Demand Kit.

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-FV1 uses standard 2-bolt circulator flanges for easy installation.

Max GPM Flow: 12gpm Max Head Feet: 18ft Material: Cast Iron Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM8-F1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Cast Iron 4 bolt Flange

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed AM3-SUEV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM3 circulator replaces Taco 003 models and other model circulators.

AMH2K-7N is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of pipe length.

CT07 Instruction Sheet Replacement cartridge for the AM7 circulator and the Taco 007 circulators. The CT07 replaces the Taco part RP007-042RP and 007-042 at 20-40% lower cost

Max GPM Flow: 16gpm Max Head Feet: 9ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM5-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. Circulator comes with BICV™ built in check valve. Our AM5 circulator replaces Taco 005 and other model circulators.

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM3-SUEV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM3 with 3/4″ Union Sweat Fittings, BICV, Line Cord and Timer

Max GPM Flow: 20gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM7-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation. Our AM7 circulator replaces Taco 007 and other model circulators.

How long do you wait for hot water? 30 seconds, 1 minute, 2, more? A home can waste up to 15,000 gallons of water a year. You pay for the water, energy and sewage fees.

FK75 Submittal Data Sheet 3/4″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM6-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free. Our AM6 circulator replaces Taco 006 models and other model circulators.

AQUA-ON DEMAND™ for TANKLESS HEATER WITHOUT BUILT-IN PUMP WITH SINGLE PIPE FOR UP TO 600 FT. OF TOTAL PIPE LENGTH- (N) NO TIMER- INCLUDES AMK-WB ON DEMAND AMR-SFVL1 flanged stainless high speed circulator with 10 ft. line cord, ¾” stainless Female NPT flange kit, AMK-WB On Demand Push Button with Receiver, Includes the AMK-ODR valve kit with valve, hose, Tee. Valve maintains 95°F

AM7-SU1LXZT1 Stainless Union Circulator with 3/4″ Male Tailpieces, with outdoor enclosure, water, sprinkler, bug, freeze protected, anti-tampering locking device tab, built-in timer, 10 ft. line cord, pump bypass connection, check, flow control, hose, bypass Tee 3/4″ FNPT x 3/4″ MNPT x 3/8″ OD Compression. AMK-ODR bypass valve kit: Bypass valve, hose, Tee. Valve maintains 95° F. Installs under sink on the cold angle stop and no power required under sink. Patented.

Max GPM Flow: 18gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM7-SUEV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AM7 Stainless with 3/4″ Union Sweat Fittings, BICV, line cord and timer.

With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free.

How to install atrapprimer

Max GPM Flow: 11gpm Max Head Feet: 18ft Material: Cast Iron Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM8-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Cast Iron 4 bolt Flange with built-in check valve

Max GPM Flow: 29gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM10-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Stainless 4 bolt flange with built-in check valve

Max GPM Flow: 16gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMR-SFVL Submittal Data SheetBrochure Stainless AMR Set on High Speed with Check Valve and Line Cord

With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free.

The AMK-UK has a unique advantage, it can handle larger pump pressures up to 21 ft. hd. and provide quiet operation. The kit includes valve, hose and tee and can be installed quickly onto the cold angle stop. A hot water circulator needs to be installed at the hot water tank.

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Half Pump Speed: Single Speed Corded: Yes AM6-SUCV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM6 with 1/2″ Union Sweat Fittings, BICV, Line Cord and Timer.

Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed AMR-3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.