Jerome Segal, a Pittsburgh native who developed the first quick-disconnect gas connector for the foodservice industry, died November 28. He was 89.

BackflowDirect

Parts for Febco Backflow Preventers · Febco 880V 2-1/2" to 10" Backflow Preventer Parts; Febco 880V 8" Backflow Preventer Parts. Febco 880V 8" Backflow ...

2022224 — If you do floor drains, include a drain test and scope requirement during commissioning, especially if crews don't work on commercial projects.

In 1955, Segal became president of Dormont Mfg. Co., then a small pipe fabrication shop. Fifteen years later, he invented the flexible stainless steel gas-appliance connector and in 1972—in collaboration with McDonald’s—developed the first quick-disconnect gas connector for the foodservice industry.

Deringer40

Deringer20X

Tekmar 557 TekmarNet Thermostat - Radiant Floor - 2 Heat Pump/Cool - Backup - Humidity Features: Optimum start, scenes Radiant floor heating and cooling, ...

6 July 2021 — Renewable disc and Teflon seat v. Flanged ends. B. Acceptable Manufacturers: 1. Febco. 2. Kennedy. 3. Stockham. 4. Watts. 5. Powell. 6. Crane. 7 ...

This 1 inch pressure vacuum breaker backflow preventer is used to protect against health hazard and non-hazard backsiphonage of toxic or non-toxic liquids ...

Deringer20Backflow

3 IN Stainless Steel Double Check Valve Backflow Preventer Assy, Deringer, Integral Butterfly Shutoffs, Grooved Ends, Dual-Action Check Modules

Deringer40X

Deringer30

After Dormont was sold in 2006, Segal retired and focused on oil painting. He is survived by his wife Monica; three sons; three stepchildren; eight grandchildren; and a sister. His full obituary can be found here.

AmesBackflow

Ensure safety with top-notch safety and pressure relief valves from trusted suppliers like Caleffi, Apollo Conbraco, and Paracchini.

Citing his inventions for improving the safety of all gas appliance installations, Segal was recognized by the Gas Appliance Manufacturers Association with a Lifetime Achievement Award.

Derringer

The Deluxe main filter is integrated with our DFS technology. Based on typical use, we recommend replacing this filter every 12 months.

Services have been held. In lieu of flowers, donations can be made to the Jewish Community Center of Pittsburgh, 5738 Forbes Ave, Pittsburgh, PA 15217 or the Animal Rescue League Shelter and Wildlife Center.

Hydrant Repair Parts for Watts*/Ancon* Series HY-420* & HY-725* and HY-400* & HY-700*

This is a double check assembly. Production began in 2014 on the models 20 & 20X while production on the 20G began in 2018. The model 20 & 20X come with grooved end integral butterfly shut offs while the 20G comes with OSY flanged end shut offs. The body is a fabricated stainless steel design with a bolted single access cover. The checks are a modular design made of Noryl plastic material. The check discs are silicone rubber. The check modules are held into the body with bolts that extend from the outside of the body into a slot to hold the check modules in place. These allen head bolts have to be unscrewed to remove the check modules from the body for repair. The check uses a torsion spring design. Spring tension does not need to be released to change the check disc.

2019118 — Plumbers almost always install the shut off valve first. That way, should your regulator need work, the plumber can shut off the water supply in ...

27 Followers, 43 Following, 6 Posts - Radiant (@radiant.inc) on Instagram: "Salt Lake City, UT "