washing machineshut-offvalverepair kit

I have a a Symmons Laundry-Mate washing machine valve and after 8 or so years, the shutoff isn't working 100%. When I put it in the off position, it seems like the water if off, ie. if I try to run the washing machine I get no water. However with it in the off position, in a few days I find that my front loading washer is 1/2 full with water, I noticed the first time the hard way as I opened the door and had a wave of water come out. Before I call a plumber I wanted to know if there is some adjustment I can try to make so that off again means off? I can't find the part number or a picture of the exact valve I have, but it looks similar to this one. The difference is with this version the source waterlines(copper) come in from the bottom while on the one I have they come in from the sides. [www.symmons.com] Any Help would be appreciated. Thanks, -Bruce

The FIRST thing you have to do is get the washer serviced so ITS valve turns off all the way. Regardless of whether the water supply is on or off, and 95% of them are on, the washer should NOT fill with water.

Washing machine shut off valvereplacement

I realize the washing machine has a problem, actually more than one. It's 15 years old and I plan to replace it, but the replacement will cost ~$850. I thought I would deal with the valve first because even if I have to pay a plumber to replace it, it will cost way less than the new washing machines. Thanks, -Bruce

The 1" Watts Series 009 Reduced Pressure Zone Assemblies are Watts "contractor grade" RPZ device. They were in production from 1989-1992. The original 1" 009 was replaced by the 009M2 in 1992. The 009 features a one cover design and is constructed of bronze and use check modules that slide into the body and are held in place with a retainer. The relief valve assembly slides down between the retainer and is directly under the cover. The check modules and relief valve assembly come apart for service. The original 009s parts do not interchange with the "M" models, so please be sure which model you have before ordering. No special tools are required for servicing 009 Series devices. Maintenance ManualSpecification Sheet

I found this information on the symmons website. Your link showed 3 different valves, but this link may help you out. [www.symmons.com] If you know which valve it is, you should be able to get a repair kit. Edited 1 times.

Welcome to Plbg.com (also known as PlumbingForum.com) where plumbing advice, education, information, help and suggestions are provided by some of the most experienced plumbers and plumbing contractors anywhere who all wish to "give back" to society. Since 1996 we have been free without popup or other invasive ads and known to be the best online STRICTLY PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to find and/or purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't track you. We absolutely do not sell your personal information. We are made possible by:

Washing machine shut off valveautomatic

quote; I thought I would deal with the valve first because even if I have to pay a plumber to replace it, it will cost way less than the new washing machines. That is true, except for the fact that the washing machine is the REAL PROBLEM, and when it is fixed the water valve will be a minor inconvenience that you will NEVER have to worry about until you disconnect the washing machine.

yours is one of the simplest repairs there is. call 1 800 SYMMONS for free replacement valve. shut off the water, take the plastic cover off, remove the hoses, remove the 2 stainless screws on the top portion of the valve. the valve will pull right away from the wall elbows. slip the new valve over the wall elbows, tighten the stainless screws.. DONE. the valve is a #400 only tool you need is a big flat screwdriver to remove valve and a channel locks to remove hoses. just be fussy with the "O" rings when reassembling..