* GPD = Gallons per 24 hours x 3.8 litres for litre per 24 hours.* 500GPD + 1000GPD units use Global Aqua RO membrane.** standard volume 10"x4.5" will remove chlorine for +/- 45,000    litres and standard volume 20"x4.5" will remove chlorine for    +/- 100,000 litres*** higher volume carbon  filter will remove around 3x more     chlorine than standard volume ones and chlorine needs to be     removed by the pre-filters as it damages the membrane

Applications: Industrial installations, processing technology, plant manufacturing, etc.Mediums: Steam, neutral gases, vapours and liquids Applications (Stainless Steel): Industrial installations, processing technology, plant manufacturing, etc Mediums (Stainless Steel): Steam, aggressive gases, vapours and liquids

Watermark certification is not a requirement with commercial systems unless you plan to use this unit in a domestic household connected to mains water supply then you may require housings with Watermark certification and brass ports which we can supply for $100 extra and the onus is on you to let us know if you require Watermark certification at the time of ordering as changing this after the unit has been dispatched will cost up to $500 more if we have to ship a unit to you, have it shipped back and change the housings to be Watermark certified ones then ship back to you.

The reverse osmosis process results in the total dissolved solids (TDS) count dropping by between 90% to 95% depending on your local environmental factors, system design and waste ratio. This purification process is commonly considered to be the most effective method of purification available, and will consistently produce water with the lowest level of contaminant. Where water of a higher standard (99-100% contaminant reduction) is required, mixed resin post filters may be fitted on request for an extra charge.

Safety Relief Valve / Applications (Stainless Steel): Chemical Industry, processing industry, plant manufacturing Safety Relief Valve / Mediums (Stainless Steel): Steam, aggressive gases, vapours and liquids

This unit is tested on a town water supply, if you plan to use this unit on any other kind of supply (bore, creek, tank etc.) we strongly recommend performing basic water tests (TDS, Salinity, Hardness/Calcium and Iron) to determine whether the water is within the systems operating parameters. If you are unsure as to whether this unit suits your needs, feel free to send us a message with any details you have on your water.

... technologies, our businesses bring better ... Technology of Water · Tackling Challenges in Global Sanitation & Hygiene · Investor Relations. Investor Relations.

Our range of passive RO units for commercial applications are designed to operate at town water pressure. These systems don't require power as they have no pumps or electronic controls. This RO unit is assembled and tested in our Queensland factory before shipping to ensure proper operation.

RK-PRV-12, Woodford, Wall Hydrants 12 Inch Woodford Pressure Reducing Valve Repair Kit Total Upgrade Kit To Model 19 Retro Fit For model 14, 17 And 22, ...

Safety Relief Valve / Applications: Industrial installations, processing technology, plant manufacturing, etc.Safety Relief Valve / Mediums: Steam, neutral gases, vapours and liquids Safety Relief Valve / Applications (Stainless Steel): Chemical Industry, processing industry, plant manufacturing Safety Relief Valve / Mediums (Stainless Steel): Steam, aggressive gases, vapours and liquids

Description · Bronze body for durability · Modular compact design · Replaceable seats and discs · Top entry · 350 psi hydrostatic test pressure · The wetted ...

Priced $514.21 (compare at $549.95). AMES 2000B Double Check Valve 2" - NOB NEW Condition: New Other: Unit is new in bulk packaging.

Complete whole house water filters, water softeners & under sink water filters. Rory, Scott & the team at RMC Plumbing have the solutions for you!

As a certified Cross Connection Control Specialist, you can now complete and submit Backflow Prevention Device Test Reports online.

NB: The main listing images are of the marine grade stainless steel brackets and if you don;t select this option in the drop down selection menu and select the while bracket you will receive a system with a white painted mild steel bracket. We have not included the option of a 10"x4.5" pre-filters with 2x 500GPD membrane for +/- 3,900L/24Hrs as the 10"x4.5"pre-filters will not last long enough as this flow rate.

- 1x white mild steel or 316 grade SS mounting bracket.- 2x big blue pre-filter housings with 1"BSP ports.- Available in either 10x4.5" or 20"x4.5" BB sizes.- 1x 1 micron poly spun sediment disposable filter.- 1x standard** / higher*** volume carbon block filter.- 1x 500GPD* or 2x 500GPD* TFC NSF RO membranes.- Appropriate ring spanner to loosen pre-filter housings.- Installation kit including a roll of tubing and tap adapters.

Kollergang 14 6961 LZ Eerbeek, Netherlands 전화: +31-20-26-26-700 팩스: +31-20-26-26-799. 아시아 태평양 본사. Watts 26th Floor, the Crest 500 West Yan'an Road

Safety Relief Valve / Applications: Chemical Industry, processing industry, plant manufacturing.Safety Relief Valve / Mediums: Steam, neutral gases, vapours and liquids

Applications: Industrial installations, processing technology, plant manufacturing, etc.Mediums: Steam, neutral gases, vapours and liquids Applications (Stainless Steel): Chemical Industry, processing industry, plant manufacturing Mediums (Stainless Steel): Steam, aggressive gases, vapours and liquids

This RO unit carries a full 24 month warranty on all parts supplied in the original order, this is subject to our standard terms and conditions listed in our operating manual

This system will produce up to 3,800 litres per day depending on your selection in the drop down menus given optimum feed water pressure. *Note: Your local water pressure and quality of the feed water can cause this estimate to vary by up to 15% as the recommended waste ratio will be higher if you are filtering water with a TDS reading above 500ppm.

Mueller Steam Specialty 3 758 N Iron Body Mueller Steam Specialty Y Strainer,8 3/8"H,0.062" Perf,Cast Iron 3 758 N Iron Body · $304.99striked off · $279.65 Save - ...

This 3/8 inch quick connect coupling works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy to install, no tools or tube ...

Applications: Industrial installations, processing technology, plant manufacturing, etc.Mediums: Steam, neutral gases, vapours and liquids

Applications (Stainless Steel): Chemical Industry, processing industry, plant manufacturing.Mediums (Stainless Steel): Steam, aggressive gases, vapours and liquids

Approvals: ISO 9001 and European PED 97/23/EC and CE markedSafety Relief Valve / Sizes: 20mm to 150mm inletSafety Relief Valve / Features: Ari safety relief valves are direct loaded with spring, wear resistant seat/disc, precision disc alignment and guide, available with soft seat disc. Manufatured in flanged and threaded options.

NB NOTE: Watermark certification is not a requirement with commercial systems unless you plan to use this unit in a domestic household connected to mains water supply then you may require housings with Watermark certification which we can supply for $ 100 extra and the onus is on you to let us know if you require Watermark certification at the time of ordering as changing this after the unit has been dispatched will cost up to $500 more if we have to ship a unit to you, have it chipped back and change the housings to be Watermark certified ones then ship it back to you.

This system can be optioned with either 10"x4.5" or 20"x4.5" pre-filters. The 20 inch filters are capable of filtering roughly twice as much water between filter changes and the 20"x4.5" pre-filters are recommended for the higher volume units.

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

Protect kitchen, laundry, indoor and outdoor taps as well as household pipework and fittings that are susceptible to the impact of hard water.