These roof drains feature a black cast iron or UV-stable ABS dome with a free-flow area that provides more than 200 square inches of protection.

DCDAChemical

The sizing of this tank is similar, yet different, from siz- ing an expansion tank in a typical hydronic heating system. Determining the size of this tank ...

Upcoming Revisions In the coming months, there will be a new set of revisions to these standards such that these requirements will be reviewed again to ensure they are the strictest of any backflow standards or documents. At time of writing, the working group to revise ASSE 1013, 1015, 1047, and 1048 is reviewing the final set of revisions.

ZurnDCDA

Most relevant reviews · Watts Water Pressure Regulator 25AUB 3/4" · Perfect House Pressure and Great Flow · Less hefty than previous versions of this model · An ...

Pressure reducing valves reduce a high and frequently fluctuating pressure to an adjustable constant pressure downstream of the valve. A spring keeps the valve ...

When designing a plumbing system (or a product), part of good design practice is looking back and performing a Failure Modes and Effects Analysis (FMEA) to see where a potential problem may arise. Central to this is evaluating the severity, occurrence, and ability to detect the problems should they arise. The severity of the ramifications of having a backflow incident is by default the most severe given the health concerns. Prior to backflow incidents happening, backflow causes are generally undetectable, even though there is the Authority Having Jurisdiction’s (AHJ’s) initial inspection and annual in-service tests required for backflow preventers. For example, consider how easy it is to leave the end of a garden hose connected to concentrated herbicide. The occurrence of backflow on a system can be high as cross-connections can be made by the general public. Even trained professionals can make an honest mistake. Hence, it is absolutely critical that the assemblies be compliant with ASSE standards and be annually tested by certified individuals.

DCDAmeaning

If a bypass line bypasses the checks, and on that line is a water meter and smaller backflow assembly of similar design, now you have an RP detector assembly (RPDA or 1047) or a DC detector assembly (DCDA or 1048). If the bypass line only bypasses the downstream check (check valve #2), and includes a meter and a single check, now you have a RPDA Type II or DCDA Type II. It should be noted that an RPDA can function as an RP and, similarly, a DCDA can function as a DC – the requirements are the same except for the needs of the detector assemblies.

Note that low-hazard refers to water pollution (smell, taste, turbidity, etc. are affected) and high-hazard refers to water contamination (resulting in negative health effects). The decision as to which substances or situations are low- or high-hazard and the backflow protection that is permissible is decided by the model codes’ technical committees and local AHJs. In the UPC, table 603.2, and in the IPC, table 608.1, hazard levels for each backflow prevention assembly are defined.

Part of the consideration as to which backflow assembly to use for which category is the potential downstream hazard. For example, fire sprinkler systems may use potable water to fill in the sprinkler system lines. These systems are stagnant over time as one huge “dead leg.” This is a non-health affecting or low hazard situation that requires high rates of flow when needed, so a DC or DCDA is appropriate. However, some fire sprinkler system designers add antifreeze or fire-retarding chemicals to the system water. Now that water is a health affecting or high-hazard fluid that requires use of an RP or RPDA.

DCDAwater

Backflow Preventer Failure Mechanisms When we refer to backflow protection, we are protecting against two scenarios in which backflow could occur, where the outlet pressure exceeds inlet pressure. How can this happen? Some examples:

Standards in the Model Codes Assemblies that comply with ASSE 1013, 1015, 1047, and 1048 are required for various locations in a plumbing system and fire sprinkler system. RPs and air gaps are the most common and best methods of backflow protection. On the following page is a chart that covers the various locations for which RPs and DCs are appropriate for use as referenced by the Uniform Plumbing Code® (UPC) and the International Plumbing Code® (IPC).

On an ASSE 1013 or 1047 backflow prevention assembly, if the downstream #2 check fails, the relief valve vents water until the outlet pressure is at least 2 psi lower than the inlet. If the relief valve fails, the upstream #1 check can still provide protection.

DCDAfire

202315 — Ditch the oversized backflow preventers. The Deringer is the shortest, lightest, best performing valve on the market.

There are several other performance requirements to which the assemblies need to be able to demonstrate compliance, including:

He joined the Division of Engineering of Brown University in 2000 as the first holder of the James R. Rice Term Chair in Solid Mechanics. Since 2020, he has ...

Series LF7R. Dual Check Valves. LF7R Sizes: 1⁄2" – 1" (15 – 25mm). Series LF7R Dual Check Valves are designed for non-health hazard residential water system ...

FEBCO

DCDAvs DCVA

20 Mar 2024 — Water pressure regulators can develop problems, causing water pressure in your plumbing system to fluctuate or go too high.

WattsDCDA

This consensus-based working group is comprised of various manufacturers, contractors, the University of Southern California Foundation for Cross-Connection Control and Hydraulic Research, and ASSE International. The working group’s goal is to compare the current set of standards with that of the existing body of standards and documents to ensure that ASSE has the strictest criteria. These revisions are going to be a major upgrade to align and improve requirements for the benefit of the public. Look for them in the coming months.

Install, Test, and Repair A key complementary portion to these assemblies is the ability to properly service the products in the field to help ensure safe delivery of potable water. ASSE/IAPMO/ANSI Series 5000, Cross-Connection Control Professional Qualifications Standard, defines the requirements for the individuals who install, test, and repair backflow protection assemblies. Both the UPC and the IPC reference following ASSE 5013, 5015, 5047, and 5048 for testing RPs and DCs (UPC 603.4.2, IPC 312.10.2). In each of those standards, it’s stated that at a minimum, backflow prevention assemblies shall be tested upon installation, annually, and immediately after repair or when returned to service. The UPC further states that the test “shall be performed by a certified backflow assembly tester or repairer in accordance with the ASSE Series 5000 or as approved by the AHJ.”

Requirements ASSE’s standards for both RPs and DCs represent the cumulative knowledge from a diverse set of backflow prevention experts, along with consideration for other standards and documents. This ensures that ASSE has the strictest backflow prevention standards for these assemblies. For example, all assemblies are first required to undergo a hydrostatic pressure test before even going through any of the dynamic tests. This is particularly conservative, as most standards for other plumbing products consider hydrostatic tests to be safety tests, checking for catastrophic failures. In our case, a catastrophic failure is a backflow situation in the field.

If you would like more information, feel free to contact ASSE at staffengineer@asse-plumbing.org. You can also find me at the ASSE International Mid-Year Meeting, held April 10-11 at the ASSE International office in Mokena, Ill.

Note on air gaps: Creating or installing an air gap is the safest, most inexpensive, and most conservative means of backflow protection. (Air gaps comply with ASME A112.1.2 and air gap fittings comply with ASME A112.1.3). They are generally mentioned in the same breath as a 1013 or 1047 assembly when citing proper backflow protection. However, while these are excellent for drainage or filling open tanks, they are open to the atmosphere by design and therefore do not have the ability to maintain line pressure during no-flow situations.

Since these products are present as containment assemblies at the point-of-service to a premises at the water meter and internal point-of-use protection known as isolation, pressure loss needs to be minimized across the assembly with minimum flow capacities defined by ASSE standards. If the products are installed on fire lines, AHJ’s may require a detector assembly to be present by way of an RPDA or DCDA so that the fire department is informed if a sprinkler is activated. ASSE 1047 and 1048 cover the requirements for that scenario.

Backflow prevention devices are installed in your plumbing system to ensure that water pressure changes don't lead to contamination. There are several types of ...

Electronic Custom Distributors (ECD) is an audio, video, automation, security, wire and telecommunication product distribution company.